Breakthrough on the new Lite-On Drives

[Soapy]

Well done, looks like the people who developed this chip are biting themselves in the arse right now
Here is a picture of the dumping process taken from XBH...



How to get your Drive Key:

Quote:

DVD key grabber for Benq and Lite-on


It receives DVDkey from drive serial port and save to file, you need a LVTTL-RS232 converter (max3232) between COM1 (embedded COM1 on motherboard, 0x3F8 IRQ4) and TX RX pins on drive power cable (for liteon the trace to powercable are cut, need a little soldering).
It also saves identify.bin and inquiry.bin, for the spoof lovers.

This "unlocks" also Benq to accept MTK vendor ATA cmds (dosflash etc...), not for liteon

You must power on PC without sata cable connected to drive.
You must poweron the drive with tray half opened and eject switch in open state.
You must power off an on again the drive each time you run the app.

For rs232 troubleshuting, consider that Liteon by default outputs an endless stream of 0x00 and 0x01 at 115200 8N1, you should see it with Realterm with display set to hex



As always, us at your own risk


Thanks and respect to Tiros, Schtrom, TMF, Redline99, c4eva


Geremia

DVD key grabber

http://rapidshare.com/files/139812584/DVDkey_V1.1.rar

I will put a good tutorial when it comes around.

Source: http://forums.xbox-scene.com/index.p...&#entry4332048