 | ||
Think this will work?
| ||
| Notices |
 |
 |  |
 |
| | LinkBack | Thread Tools | Display Modes |
08-20-2008, 03:13 AM
| #1 (permalink) | ||||||
 Join Date: Oct 2005 Location: Delphos, Ohio
Posts: 2,705
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 26
Received Thanks: 10
Nominated 0 Times in 0 Posts TOTM Award(s): 0    | Think this will work? My current xbox 360 has about 8months left on it's extended warranty. I have an xbox that I believe was flashed wrong by someone, therefor it will play dvds/cds but not games. Think I could pull off switching the back stickers over, and putting my warranty seal on the broken one and "call it in broken" ?  | ||||||
|  |
| |
|
08-20-2008, 07:54 AM
| #2 (permalink) | ||||||
| Junior Member
 Join Date: Jan 2006 Location: Mckinney,Tx
Posts: 217
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 5
Received Thanks: 2
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work? yes remove one use the hairdryer trick to cleanly remove the other one and place it on the other one i'll find a tut for ya new one: old one Last edited by Vampire; 08-20-2008 at 08:02 AM. | ||||||
|
| |
| |
|
08-20-2008, 10:00 AM
| #3 (permalink) | ||||||
Join Date: Oct 2005 Location: Delphos, Ohio
Posts: 2,705
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 26
Received Thanks: 10
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work? Shouldn't I replace the serial number sticker on the back too? Last edited by ThePope43; 08-20-2008 at 10:02 AM. | ||||||
|
| |
| |
|
08-20-2008, 10:09 AM
| #4 (permalink) | ||||||
| Junior Member
Join Date: Jan 2006 Location: Mckinney,Tx
Posts: 217
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 5
Received Thanks: 2
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work?
Quote: Originally Posted by ThePope43  Shouldn't I replace the serial number sticker on the back too? if so then might aslong as they are the same model if not then i wouldn't worry btw were they both made about the sametime? | ||||||
|
| |
| |
|
08-20-2008, 10:24 AM
| #5 (permalink) | ||||||
Join Date: Oct 2005 Location: Delphos, Ohio
Posts: 2,705
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 26
Received Thanks: 10
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work? I'm pretty sure so yeah. I'm thinking I should replace both stickers and do them neatly so all they have to do is see it, I'm sure stupid MS won't pay attention too close. | ||||||
|
| |
| |
|
08-20-2008, 10:24 PM
| #6 (permalink) | ||||||
| Junior Member
Join Date: May 2008
Posts: 238
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 1
Received Thanks: 5
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work? Dont replace the serial code. Thats a dumb thing to do. I had a customer who tried to to the Walmart Swap. He had a broken Pro, and he bought an Arcade. So he tried taking the sticker off the arcade, and it ripped to dismay. Anyways he could not even flash the H79 as at that time the Pass Key **** was the only way to go  .So he brought it into me to flash, I could not either so I gave him an old pro. He gave me the arcade and the RROD he had. My advice leave the serial number on the back just put the sticker on! (I have done this a lot) | ||||||
|
| |
| |
|
08-20-2008, 10:47 PM
| #7 (permalink) | ||||||
Join Date: Oct 2005 Location: Delphos, Ohio
Posts: 2,705
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 26
Received Thanks: 10
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work? But it has to be MY serial number for it to be under warranty. | ||||||
|
| |
| |
|
08-20-2008, 10:47 PM
| #8 (permalink) | ||||||
| Premium Member 
 Join Date: Dec 2005 Location: Pennsylvania, USA
Posts: 550
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 12
Received Thanks: 19
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work? If you do swap the serial stickers on the back you might wanna swap the serial numbers under the USB slots too | ||||||
|
| |
| |
|
08-20-2008, 10:51 PM
| #9 (permalink) | ||||||
Join Date: Oct 2005 Location: Delphos, Ohio
Posts: 2,705
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 26
Received Thanks: 10
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work? So I'm going to take the warranty sticker from my good one, and put it on this broken cd drive one. Then wrap it in some towels and jam the fan with a stick, and leave it on for a while...that's what I read I should do to make it RROD | ||||||
|
| |
| |
|
08-21-2008, 04:25 PM
| #10 (permalink) | ||||||
| Junior Member
Join Date: May 2008
Posts: 238
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 1
Received Thanks: 5
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work? Dont even bother to fake the RROD. I had an Elite around in September but it had H79 I sent it in (I wanted BENQ), and I claimed it had RROD. Anyways I got one back with another H79..... | ||||||
|
| |
| |
|
08-26-2008, 05:24 PM
| #11 (permalink) | ||||||
| Junior Member
Join Date: May 2008
Posts: 238
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 1
Received Thanks: 5
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: Think this will work? lol if your still thinking about this. Open the consoles up and swap the guts. Or just say console has RROD. | ||||||
|
| |
| |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mcafee tut doesn't work | I premium I | Bridging Help | 2 | 04-16-2007 12:27 PM |
| Rainbow Six Vegas Multiplayer Guide | CaLL mE nEoN | Other Xbox 1 Games | 0 | 04-06-2007 11:30 PM |
| My Yelo wont work, i need help | aRZie | Halo 2 Mod Help | 4 | 04-03-2007 08:42 PM |
| getting killtrocity disc to work on xbox | aRZie | Halo 2 Mod Help | 7 | 03-23-2007 07:28 PM |
Linear Mode
