How to Update XBR with Flash360 Flash 360 is a new flashing program that boots from the 360 Dashboard. It makes updating it 100x easier and faster! Full NAND dumps and flashes in around 30 seconds! What you will need: Xbox 360 with XBR/FreeBOOT installed USB Drive with Flash360 files in root. XeXLoader New Version of XBR/FreeBOOT. If Unbanning then your New XBR/FreeBOOT image with the unbanned kv. 1) Download Flash 360 from Xbins. Xbins: Code (Text): http://rapidshare.com/files/283243738/xbins.exe Code (Text): http://www.megaupload.com/?d=ZZ6A54YA Flash 360 directory: Code (Text): XBOX360/dashboards/Flash360 2) Put Flash360.xex and media folder in root of USB drive. 3) Put XBR image with or without KV and Config injected. It doesn't matter. Name the File Code (Text): updflash.bin 4) Connect USB drive to 360 and turn the 360 on. 5) Go into your games and start XEXLoader 6.)In XEXLoader launch the Flash360.xex 7)Once Flash360 has loaded up. We are going to make a backup of your NAND before we flash to it. So hit the X Button. 8) Hit A Button to Save entire NAND to file. 9) Once done you will see this. Then press any button to continue. 10) Press back to return to main menu. Now push A Button to Write updflash.bin to NAND. 11) If you did not inject your KV and config then you will push Button A. If you injected your KV and config then you will push Button B. 12) It will say comparing KV's then say. Press A button to begin. So Press A. 13) You will then see the progress. 14) When done you will see this. Press any button to continue. 15)Press back button to go to main menu 16)Press BACK Button to SHUTDOWN. *DO NOT RETURN TO DASHBOARD!* 17) You are done. Turn the 360 back on and enjoy your updated XBR!