For this you need Gravemind V1.5 or Gravemind V1.6B, i recommend V1.6B from now on. Because i only use V1.6B Gravemind V1.5 Gravemind V1.6B How can Master Chief fly the Pelican without changing the "bipd", you need Gravemind v1.5 to do this. **Remember when you change something don't forget to save it allways, or the program will not save your changes** First open a map with a Pelican on it [Example: "03b_newmombasa.map" (Metropolis)], then scroll down and go to "vehicles" and go to "Pelican", then right click and choose "Meta Editor", scroll down again and find the "Seats" session, in the seat "0" disable "Invisible" to see the driver on it, scroll a little down and you will see "Label", the label contains "pelican_d", change to "ghost_d". If you want to see a string to get inside of the Pelican seat driver, scroll down a little and you will see "Unknown", the "0" funcion have a box saying "Enter Seat String", type in that box "warthog_enter_driver". Or type whatever you wanna see xD. Heres a Xfire video when i was flying the Pelican and shooting the Rocket Pods with Master Chief. Check my YouTube videos. I dare you 8D !
Have you done both of the following (the second one may not be necessary): 1. Right click on the Gravemind shortcut, go to properties, select compatibility tab, check 'Run this program as an administrator'. 2. After starting Gravemind, go to settings and verify that Shared, Main Menu, and Singleplayer Shared are at the correct paths. If you have a 64-bit like me, then they should be located in Program Files (x86).
