What's new

Tutorial E3 Flasher 4.81 Downgrade Tools/ Guide /Extract a PS3 Console ID

  • Thread starter Pianist Prodigy
  • Start date
  • Views 104,866
DeeLaRoc

DeeLaRoc

Getting There
Messages
439
Reaction score
72
Points
180
Sin$
0
When u say recovery mode do u mean from the bck ups I made during the dump process?
1. Turn off your PS3.

2. Hold down the power button and wait for your PS3 to turn on and off.

3. Once it has turned off, hold the power button until you hear 2 beeps.

4. When you hear the 2 beeps let go of the power button.

5. Plug in your controller and press the PS button.

6. The Recovery menu should be on your screen now!
 
DeeLaRoc

DeeLaRoc

Getting There
Messages
439
Reaction score
72
Points
180
Sin$
0
Should I select restore system or system update ?
Try a restore first (if it works then we can find out about QA status), if that doesn't work then do a system update with the firmware in your USB drive on the port closest to the blue ray drive.
 
KrazyDeemon

KrazyDeemon

Newbie
Messages
17
Reaction score
0
Points
35
Sin$
0
Remind me what QA status is , do u mean what firmware its running cause I restored and now it says start n select again did it n nothing happens still
 
DeeLaRoc

DeeLaRoc

Getting There
Messages
439
Reaction score
72
Points
180
Sin$
0
Remind me what QA status is , do u mean what firmware its running cause I restored and now it says start n select again did it n nothing happens still
If you didn't have QA enabled when you downgraded, then you might need a flasher to fix this. What firmware were you on before and what downgrader did you use?
 
DeeLaRoc

DeeLaRoc

Getting There
Messages
439
Reaction score
72
Points
180
Sin$
0
You used the wrong downgrader. HABIB you use the Rogero downgrader. Rebug has a separate one. You'll have to get a recovery MFW, enable QA, then go do 2 updates to 3.55 OFW to fix ROS0 and ROS1. From there, making sure QA is enabled if it isn't, you can go to any firmware that you wanted. 
Should I just try n flash it from start again
Sure if you wanted, but the other way I've suggested works as well without opening up your PS3 again.
 
KrazyDeemon

KrazyDeemon

Newbie
Messages
17
Reaction score
0
Points
35
Sin$
0
Its already open anyways so I might just try n start over , do I need the Samsung update 2nd time round, or do u install just the first time ?
 
E

echicero

Newbie
Messages
3
Reaction score
0
Points
35
Sin$
7
hello I have good manufactures in 3.40 and 4.76 is in. If I cut my THEN 3.55 FLASHr Lack aria ??
 
Last edited:
KrazyDeemon

KrazyDeemon

Newbie
Messages
17
Reaction score
0
Points
35
Sin$
0
English pls bro no eco da spanio 
I'm in a 8002F14E error update loop hdd was corupted 
Tryin to correct now
 
Pianist Prodigy

Pianist Prodigy

Retired
Retired
Legendary Veteran MotM Contest Sponsor
Messages
6,587
Reaction score
3,708
Points
1,835
Sin$
7
hola buenas yo tengo en fabrica 3.40 y esta en 4.76. si reduzco 3.55 luego me aria falta flashr??
This is a English forum site, not a Spanish forum site, although I understand what you saying. But the rules on this site you need to be speaking English.
 
Pianist Prodigy

Pianist Prodigy

Retired
Retired
Legendary Veteran MotM Contest Sponsor
Messages
6,587
Reaction score
3,708
Points
1,835
Sin$
7
Thread Updated Added: How to Brick & UnBrick a PS3 Slim

This tutorial very helpful and it had helped me.
 
Top Bottom
Login
Register