![]() | ||
Simple Memory Stick IPL Installer - Updated
| ||
| Notices |
![]() |
| | LinkBack | Thread Tools | Display Modes |
| | #1 (permalink) | ||||||
| Email NOT Verified
Join Date: Feb 2007
Posts: 374
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 0
Received Thank 1 Time
Nominated 0 Times in 0 Posts TOTM Award(s): 0 ![]() ![]() | Simple Memory Stick IPL Installer - Updated Here is a lil program I put together to simplify writing the IPL to the memory stick (and also formatting it), one of the first few steps when creating pandora/universal unbricker memory stick. All you have to do is double click the icon, put in drive letter of your PSP, and press Y at the prompts when asked. Way simpler then knowing all those batch commands. This is only the first step to creating the pandora memory stick and battery setup. You will still have to create the battery after this (1.50 or CFW PSP needed). The memory stick is what people seem to have the most trouble with, reason why I created this They are some other ones out there, but it's always fun to create your own. ![]() Once you have run this on your memory stick you will not need to install the IPL again unless you FORMAT the memory stick. For example you can DELETE ALL the files off the memory stick and swap files from 1.50 unbricker to 3.71 M33-2 without having to run this again. Last edited by hexitnow; 12-24-2007 at 07:08 PM. | ||||||
| | |
| | #3 (permalink) | ||||||
| Email NOT Verified
Join Date: Jul 2007
Posts: 159
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 0
Received Thanks: 0
Nominated 0 Times in 0 Posts TOTM Award(s): 0 ![]() | Good Job On Creating this program Hexitnow it should help people that are lazy or get confused in downgrading with Pandora | ||||||
| | |
| | #5 (permalink) | ||||||
| Email NOT Verified
Join Date: Feb 2007
Posts: 374
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 0
Received Thank 1 Time
Nominated 0 Times in 0 Posts TOTM Award(s): 0 ![]() ![]() | Hey guys I was dinking around with this and noticed a really stupid bug. Anyhow it's fixed now and should work just fine. Any problems lemme know | ||||||
| | |
| | #7 (permalink) | ||||||
| Email NOT Verified
Join Date: Feb 2007
Posts: 374
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 0
Received Thank 1 Time
Nominated 0 Times in 0 Posts TOTM Award(s): 0 ![]() ![]() | Oh when I packaged the files with the .exe I forgot to link where they would be extracted. Causing mspformat.exe and msinst.exe to not run properly (being read from wrong location)....it was only a couple lines of code and it was fixed...if u can even call it code. | ||||||
| | |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |