{TUT} Customising your Psp's Flash0

[sirkikurasse]

Hi this is my first tut and i didn't see much on this topic so here we go:

=======Things Required=============================
A Psp with custom firmware installed (latest is 5.00 m33-6)
A usb cable
A computer (duh)
===============================================
Now on to the tut

Step 1: Turn your psp on and put it in recovery mode (you can do this by holding down the "R" trigger whilst it is turning on)

Step 2:Once in recovery mode plug in your usb cable and go to Advanced--->toggle Flash0 or something like that on the psp

Step 3:back up everything in your flash0 (VERY IMPORTANT!!) and place it where you normally wouldn't go
Step 4:Get a custom flash0 theme i recommend custompsp(dot)de
Make sure it is compatible with your firmware!!!

Step 5:Now open up the folder containing your custom theme. There should be 2 folders: font and vsh. Copy those over to your psp and overwrite when prompted.

Step 6: Now simply restart the psp and enjoy

(if unsucessful or glitches occur just overwrite the flash with your backup)

I am not held responsible for any damage that may occur to your psp and you do this at your own risk!!

if i helped out a thank you and rep would be nice.

Cheers!

[Doob E Snack]

Yeah be sure to back up your flash0 or you are going to get screwed someware along the line just a heads up for anybody reading this tut.