How to make a Rapid Fire Controller

**David5534** · 10-02-2008, 03:30 PM

It should work but seems like it would be harder to use in game.

**ForrrestMaster** · 10-02-2008, 04:39 PM

Yes it should work.

**punkskater2448** · 10-02-2008, 07:06 PM

Quote: Originally Posted by David5534

It should work but seems like it would be harder to use in game.

Its not hard to use in a game. Instead of pulling the rt you just hold down this button. Very simple.

**David5534** · 10-02-2008, 07:34 PM

Quote: Originally Posted by punkskater2448

Its not hard to use in a game. Instead of pulling the rt you just hold down this button. Very simple.

I was talking about using a toggle switch.

**punkskater2448** · 10-03-2008, 12:32 PM

It should work. I dont see why it wouldnt. It just may be semi difficult to use

TheresTwoOfUs · 10-06-2008, 06:21 PM

Hey, is it possible to use any wire, like headphone wire or sumat like that?

**David5534** · 10-06-2008, 06:38 PM

Yes, i used an old dvd player wire.

TheresTwoOfUs · 10-06-2008, 06:40 PM

thanks alot, I can't wait till all my materials arrive, now my last question is does rapid fire controllers work on automatic weapons, i ask this because seeing an automatic g3 is a little bit more suspicious than a mp5 shooting a bit faster.

EDIT: Sorry but I found this BEFORE I found this thread Ingredients

**David5534** · 10-06-2008, 07:32 PM

It does but it will make the gun shoot a little slower then normal (unless you have a chip).

**punkskater2448** · 10-06-2008, 09:08 PM

Don't worry. I play with the g3 alot and no one has ever said anything to me about it.

TheresTwoOfUs · 10-07-2008, 04:34 AM

I know I said that was my last question, but heres another one, is it possible to make it shoot faster, you mentioned a chip, is there anything I can get cheap like a resistorwhich can double the output of the led pulse thing (incase your wondering...no I havn't a clue what I'm on about)

**punkskater2448** · 10-07-2008, 09:55 AM

Your best bet would be getting the chip. Everything comes pre programmed all you have to do is solder the wires, drill a hole then your set.

xJudas · 10-13-2008, 07:10 PM

Works fine for me, only one real problem and its basically stated in the beginning. Be careful if your using a re-chargeable battery pack, the second you plug the wire into your controller to charge, the mod will not work. You will have to take the charge cable out, pull out the battery pack (or turn controller off) and then turn it back on for it to work right.

Otherwise it was easy as pie, and you should mention for people who are new to soldering to be VERY careful with the LED, mine broke because I moved the wire too much and it cracked it. Also don't forget to use your flux! Dirty wires = bad connections!

Wide shot

Used a hot glue gun to back it, insulates it well so the wires wouldn't get crossed.

Ignore the blue electrical tape, I originally used heavy gauge wire, but switched.

Outside is digusting, but I'm repainting my controller anyway.. Textured spraypaint, for better grip!

rickeyf11 · 10-13-2008, 09:34 PM

my LED broke off too!

xJudas · 10-14-2008, 12:01 AM

Quote: Originally Posted by rickeyf11

my LED broke off too!

Great minds think alike, the mod and controller should still work. I think my mod actually works faster now without the light, maybe because the power is going directly to the mod and nothing's wasted on the light?

If you want you can pick up more LEDs here;
AcidMods Shop

I might try out a red one

		Se7enSins Forums > Xbox 360 Gaming > Xbox 360 Tutorials > Hardware Customizations
How to make a Rapid Fire Controller

How to make a Rapid Fire Controller

This is a discussion about How to make a Rapid Fire Controller within the Hardware Customizations section, where you will Learn to modify your Xbox 360's hardware.; It should work but seems like it would be harder to use in game.