How to Mod Old Maps On A DVD-R (By XxMoNkEy42xX)

**XxMoNkEy42xX** · 01-10-2007, 07:23 PM

But you didn't know about it? I swore some kid tryied to get me introuble because when i had it seperate he said i ripped it even when it said like M4H in the layer break tut and on the title, and he said he asked you and that it was ok. lol

Also M4H if you wanna help me out andyour site is still up can you let the members know we are hosting tryouts for the modding team here on se7en sins.

xXDistortXx · 01-11-2007, 10:20 PM

ok, whenever i go to open the iso in ss patcher, it tells me it is not a recognized format, do i have the wrong version of ss patcher?

Forgoten Dynasty · 01-12-2007, 11:25 PM

can i use a DVD RW so i can change my mods with out using a dif cd

**XxMoNkEy42xX** · 01-12-2007, 11:38 PM

Yup just erase the disc and re-write.

lilduceboy · 01-13-2007, 12:29 AM

is it normal for it to make a horrible shreaking noise?

**XxMoNkEy42xX** · 01-13-2007, 12:42 AM

What makes the noise and when? lol

lilduceboy · 01-13-2007, 01:03 AM

just when i did emergency eject it was shreaking like i was killing it lol... it stoped now... but now i have another question... it took me like 2 minutes to get to 7% and now its been like 10 minutes and its only it 9%... so its going ALOT slower... nothing i can do really except for complain lol... by the way nice tutorial...

~~Champ~~ · 01-15-2007, 12:16 AM

the new link for iso buster says no permission can u put the old one back up or some1 rapidshare it pls

nvm just need an Key for iso now

jaggizle1 · 01-16-2007, 10:28 AM

my IMAGE000.iso becomes a rar file and will not open up in ss patcher.. can somebody help me out on this please?

***Scar*** · 01-16-2007, 11:07 AM

rename it to IMAGE000.ISO and it should work

~~Champ~~ · 01-16-2007, 06:14 PM

he just said thats what he has... but i have th same problem also -.-

Forgoten Dynasty · 01-16-2007, 09:21 PM

Quote: Originally Posted by ZeroSwordMaster

Why would you need to mess with the Xbox Drive doing this tut?

does it still **** up your eyes if u dont open your xbox u just use the emergacy eject button

***Scar*** · 01-16-2007, 09:30 PM

Quote: Originally Posted by forgoten dynasty

does it still **** up your eyes if u dont open your xbox u just use the emergacy eject button

no it doesnt

Forgoten Dynasty · 01-16-2007, 09:31 PM

Quote: Originally Posted by XxMoNkEy42xX

once it starts spinning at full speed again you can then hit save.
10. Then it will start ripping once it gets to 7% you will get a warning just check the box replace with dummy data and the check the box always apply selction then hit selection.

hit save in iso buster?

**XxMoNkEy42xX** · 01-16-2007, 09:35 PM

Yes hit save on the screen where you went to save it as IMAGE000.iso.

bobgore · 01-17-2007, 12:53 PM

I made my disc and I'm at the hotswap part.. I have a 360.. do i really have to rip the whole thing apart to do it?? or can i use the emergency eject?

***Scar*** · 01-17-2007, 01:12 PM

you have to take it apart, exerjency eject on the 360 resets the console

bobgore · 01-17-2007, 01:23 PM

thanks

xXDistortXx · 01-17-2007, 04:42 PM

ok, a lot of people have asked this question, including me, but no one has gotten an answer. if we get the message that says that it is not a recognized filetype, what should i do? it is an .iso file, so what am i doing wrong, monkey42, have you ever run into this problem? any help would be greatly appreciated.

bobgore · 01-17-2007, 11:37 PM

great tut i took apart my 360 and hotswaped and it all worked first try

01-10-2007, 07:23 PM	#221
XxMoNkEy42xX Yup, I'm High.	But you didn't know about it? I swore some kid tryied to get me introuble because when i had it seperate he said i ripped it even when it said like M4H in the layer break tut and on the title, and he said he asked you and that it was ok. lol Also M4H if you wanna help me out andyour site is still up can you let the members know we are hosting tryouts for the modding team here on se7en sins. Last edited by XxMoNkEy42xX; 01-10-2007 at 07:23 PM. Reason: Automerged Doublepost

01-15-2007, 12:16 AM	#228
~~Champ~~ BANNED	the new link for iso buster says no permission can u put the old one back up or some1 rapidshare it pls nvm just need an Key for iso now Last edited by Champ; 01-15-2007 at 12:16 AM. Reason: Automerged Doublepost

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

		Se7enSins Forums > Other Modifications > Other Games > Halo 2 > Halo 2 Modding Tutorials
How to Mod Old Maps On A DVD-R (By XxMoNkEy42xX)

01-11-2007, 10:20 PM	#222
xXDistortXx Senior Member	ok, whenever i go to open the iso in ss patcher, it tells me it is not a recognized format, do i have the wrong version of ss patcher?

01-12-2007, 11:25 PM	#223
Forgoten Dynasty 7S Addict	can i use a DVD RW so i can change my mods with out using a dif cd

01-12-2007, 11:38 PM	#224
XxMoNkEy42xX Yup, I'm High.	Yup just erase the disc and re-write.

01-13-2007, 12:29 AM	#225
lilduceboy Novice	is it normal for it to make a horrible shreaking noise?

01-13-2007, 12:42 AM	#226
XxMoNkEy42xX Yup, I'm High.	What makes the noise and when? lol

01-13-2007, 01:03 AM	#227
lilduceboy Novice	just when i did emergency eject it was shreaking like i was killing it lol... it stoped now... but now i have another question... it took me like 2 minutes to get to 7% and now its been like 10 minutes and its only it 9%... so its going ALOT slower... nothing i can do really except for complain lol... by the way nice tutorial...

01-16-2007, 10:28 AM	#229
jaggizle1 Novice	my IMAGE000.iso becomes a rar file and will not open up in ss patcher.. can somebody help me out on this please?

01-16-2007, 11:07 AM	#230
*Scar* Retired Staff	rename it to IMAGE000.ISO and it should work

01-16-2007, 06:14 PM	#231
~~Champ~~ BANNED	he just said thats what he has... but i have th same problem also -.-

01-16-2007, 09:21 PM	#232
Forgoten Dynasty 7S Addict	Quote: Originally Posted by ZeroSwordMaster Why would you need to mess with the Xbox Drive doing this tut? does it still **** up your eyes if u dont open your xbox u just use the emergacy eject button

01-16-2007, 09:30 PM	#233
*Scar* Retired Staff	Quote: Originally Posted by forgoten dynasty does it still **** up your eyes if u dont open your xbox u just use the emergacy eject button no it doesnt

01-16-2007, 09:31 PM	#234
Forgoten Dynasty 7S Addict	Quote: Originally Posted by XxMoNkEy42xX once it starts spinning at full speed again you can then hit save. 10. Then it will start ripping once it gets to 7% you will get a warning just check the box replace with dummy data and the check the box always apply selction then hit selection. hit save in iso buster?

01-16-2007, 09:35 PM	#235
XxMoNkEy42xX Yup, I'm High.	Yes hit save on the screen where you went to save it as IMAGE000.iso.

01-17-2007, 12:53 PM	#236
bobgore Novice	I made my disc and I'm at the hotswap part.. I have a 360.. do i really have to rip the whole thing apart to do it?? or can i use the emergency eject?

01-17-2007, 01:12 PM	#237
*Scar* Retired Staff	you have to take it apart, exerjency eject on the 360 resets the console

01-17-2007, 04:42 PM	#239
xXDistortXx Senior Member	ok, a lot of people have asked this question, including me, but no one has gotten an answer. if we get the message that says that it is not a recognized filetype, what should i do? it is an .iso file, so what am i doing wrong, monkey42, have you ever run into this problem? any help would be greatly appreciated.

01-17-2007, 11:37 PM	#240
bobgore Novice	great tut i took apart my 360 and hotswaped and it all worked first try