Creating and burning a Halo 2 Disc for XBX Live

[Kontra]

yeah but you need to use a comp drive for the rip and you need to hotswap

[aaronszone1]

is there a tut for that or can i get help from you or anyone else

[aaronszone1]

u really dont have to take ur computer apart....after you stop the drive u can just stick a paper clip in the little hole on the front of the drive then put it back in and respin the drive...that worked fine for me...i figured this out cuz i did it on a laptop...i hope i helped someone with this

[xXDistortXx]

Quote: Originally Posted by aaronszone1

u really dont have to take ur computer apart....after you stop the drive u can just stick a paper clip in the little hole on the front of the drive then put it back in and respin the drive...that worked fine for me...i figured this out cuz i did it on a laptop...i hope i helped someone with this

this only works on some drives because some computers recognize that the disc has been ejected whether using the emergency eject or not. so thats why people keep getting the error message at 0% instead of 7% i had this problem too, but i did the disassemble and it worked fine.and people should not ask someone to burn them a disc, because im pretty sure thats illegal [someone please correct me if im wrong]

[Muddawg]

could someone post the link for monkeys tut

[aaronszone1]

well i guess i did do it wrong then cuz i got the error msg at 0%....dang that sux now i have to go buy a new drive.....

[xXDistortXx]

Quote: Originally Posted by mud21dawg

could someone post the link for monkeys tut

come on. are you serious? its literally the thread right below this one.

but heres the link, in case you can't find it^_^

http://www.se7ensins.com/forums/halo...onkey42xx.html

[aaronszone1]

do i really need a dvd-r DL or can i just use a normal cd-r because im kind of lacking money....i do have the phillips drive and i looked at this compatibility list and it said that a cd-r would work just fine....i think im gonna try it later but if someone could give me a heads-up that it definitly WONT work....

yes you can use a normal CD-r if your cd-r is magical and can hold 8gb's of data.

You need a dual layer dvd-r not because it's "better", but because it can hold all of the data that you need it to.

[aaronszone1]

how much does a dvd drive cost and how much is a normal dvd-r DL?

i give up...i dont have enough money to do this...i have to buy the drive and the discs....is there anyone that can sell me like 4 or 5 discs with mods that i make that someone viewing this can direct me to?!?!?

[xXDistortXx]

uum, im not sure if you can sell them here. but i dunno, someone could some other way maybe... but you can pick up a DVD drive for anywhere for pretty cheap.

heres one----> Newegg.com - LITE-ON Black 20X DVD±R DVD Burner W/ 12X DVD-RAM write and LightScribe - OEM

its a DVD-R Burner, but thats all you should need, plus its cheap, so you dont have to worry about the disassemble, its not that hard to replace. you can still use the drive. just, instead of popping the magne out of the DVD-Drive on the top of the case, use the one for your xbox if you already did that. or use an old drive magnet, that way you can just screw on the top and pop it back into your comp^_^

[aaronszone1]

im basically limited to buying this at bestbuy cuz thats the only form of money i have...is a best buy gift card which im gonna save to buy forza 2 or pre-order halo 3

[MiCrOz]

If you're disc is stopping at 0% you do NOT need a new drive, but you do need to open your computer and drive so you can hotswap them that way.

[xXDistortXx]

maybe you werent paying attention to the part where people like their DVD Dirves ro that its not their computer. if you have an expensive drive that you DONT want to take apart becuase its too expensive, or its not yours, you can buy a new one for under 60 bucks. but i tried the hotswap about 20 times and finally got it, but you have to do it REALLY fast on some drives, so good luck with that!

and in the tutorial, you just sa to burn the .dvd file, then do we burn the .iso or what? thanks

[M4H]

If you are looking for a good DVD+DL burner that will accept bit-setting and will burn discs well here you go: $29.99

NEC ND3550 16x DVD±R Burn & Read 8x DVD+RW 6x DVD-RW 8x DVD+R DL 6x DVD-R DL 48x32x CD-RRW Beige DVD Burner (No Software) N27-1894 BULK at TigerDirect.com

This drive works great, how do I know..... I bought one for a computer I was building for a buddy and he burns H2 discs like crazy. So if you want a reliable cheap DVD+DL burner go buy this one.

[xXDistortXx]

Quote: Originally Posted by xXDistortXx

and in the tutorial, you just say to burn the .dvd file, then do we burn the .iso or what? thanks

??

[atp synergy]

ok about the ripping i got the error at 0% and i hotswaped discs the disk is spinning and everything but it was ripping for about 2-3 hrs now and its at 0 % i must have done somen wrong im using a sony dvd drive i dontknow if i have to do anything to the drive to get it to work or not

[lucky7.7.7]

could i use a dvd+rw for this tutorial?

[Scar]

Quote: Originally Posted by lucky7.7.7

could i use a dvd+rw for this tutorial?

yes, but you can only hotswap with the disc once you burn it

[DaRkRaZ0r]

ok i started this and i used the emergency eject and i got the erroro message at 0%....and the extracting has been going on for a 1/2 hr and is still at zero...why wont this work!