Tut: How to member lock a clan

Mandela · 12-16-2006, 03:42 PM

I see lots of people ask this all the time so here it is.

Things needed: STANDBY

Note: dont worry about lagging out of the party

1. Start a new clan

2. Hit the standby button then go to leave clan

3. Back out of your friends list then open it back up, so that it refreshes

4. Go to CREATE CLAN option and keep hitting the "A" button until it lets you create a clan (gets a little laggy)

5. Pick a random clan name, then undo the standby and then go to done, so it makes the clan

6. Repeat steps 2-5 at least 4 times, so that when you leave the level 1 clan you're in, you get put into a clan you made in standby mode.

7. After doing all that you're pretty much done you got the member lock set up.

8. find some newb that will send you a clan invite, if done right, then right when you accept the clan invite you will automatically be in your level 1 and not the clan that u got and invite to, that means you did it right. On your screen you'll be in a level 1 clan and on their screen you'll be a member in their clan, and when they try and remove you from the clan it will say "Sorry you don't have permission to do this" and when they go to change clan role it says your an overlord so they can't do anything at all besides watch their clan go down

9. Ok here's how you boost off it. Make sure that all overlords and staffs are online, if they're not then you can go ahead and destroy the clan. If staffs and Overlords's are offline then you can go ahead and go to leave clan, no standby needed just go to leave clan, you'll find yourself in another level 1 clan you made just keep going to leave clan until your in the clan that you got invited to. There you go you'll be in their clan so send invites out and boost off it quick before the overlord gets on, because he can boot u from the clan if your boosting at the moment. That's why i send invites out then i member lock it again.

have fun

Sgt117 · 12-16-2006, 03:46 PM

post this in the tuts forum unless u hav a vid

ll Mod4Fun ll · 12-19-2006, 09:41 PM

the member giltch was such a sick glitch when there was clan rank but witched that they would have kept the clan matches

***mischifous*** · 12-19-2006, 09:59 PM

Yea, it was. But now its usless.

ll XzoRcisT ll · 01-24-2007, 07:42 AM

I thought this didn't work anymore.

Demonspeed16 · 01-24-2007, 07:58 AM

thanx for bumping a 2 yeard old thread and it doesnt matter cuz there is no more clan rank

ll XzoRcisT ll · 01-24-2007, 05:10 PM

Quote: Originally Posted by mayortheslayer

thanx for bumping a 2 yeard old thread

2 years? This thread was created 4 weeks ago.. lol

~~CaptainEinstein~~ · 01-24-2007, 05:14 PM

i would still be cool

***mischifous*** · 01-24-2007, 05:42 PM

Quote: Originally Posted by ll XzoRcisT ll

I thought this didn't work anymore.

I said that, look at the post above you...

indianb0y42 · 02-17-2007, 06:18 PM

i did it once, and it didnt work for me. i dont kno wut happened

12-16-2006, 03:42 PM	#1
Mandela Member	Tut: How to member lock a clan I see lots of people ask this all the time so here it is. Things needed: STANDBY Note: dont worry about lagging out of the party 1. Start a new clan 2. Hit the standby button then go to leave clan 3. Back out of your friends list then open it back up, so that it refreshes 4. Go to CREATE CLAN option and keep hitting the "A" button until it lets you create a clan (gets a little laggy) 5. Pick a random clan name, then undo the standby and then go to done, so it makes the clan 6. Repeat steps 2-5 at least 4 times, so that when you leave the level 1 clan you're in, you get put into a clan you made in standby mode. 7. After doing all that you're pretty much done you got the member lock set up. 8. find some newb that will send you a clan invite, if done right, then right when you accept the clan invite you will automatically be in your level 1 and not the clan that u got and invite to, that means you did it right. On your screen you'll be in a level 1 clan and on their screen you'll be a member in their clan, and when they try and remove you from the clan it will say "Sorry you don't have permission to do this" and when they go to change clan role it says your an overlord so they can't do anything at all besides watch their clan go down 9. Ok here's how you boost off it. Make sure that all overlords and staffs are online, if they're not then you can go ahead and destroy the clan. If staffs and Overlords's are offline then you can go ahead and go to leave clan, no standby needed just go to leave clan, you'll find yourself in another level 1 clan you made just keep going to leave clan until your in the clan that you got invited to. There you go you'll be in their clan so send invites out and boost off it quick before the overlord gets on, because he can boot u from the clan if your boosting at the moment. That's why i send invites out then i member lock it again. have fun __________________ If someone helps or you find something they posted useful please press the "Thanks" button.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

		Se7enSins Forums > Other Modifications > Other Games > Halo 2 > Halo 2 Glitches
Tut: How to member lock a clan

12-16-2006, 03:46 PM	#2
Sgt117 7S Addict	post this in the tuts forum unless u hav a vid

12-19-2006, 09:41 PM	#3
ll Mod4Fun ll 7S Enthusiast	the member giltch was such a sick glitch when there was clan rank but witched that they would have kept the clan matches

12-19-2006, 09:59 PM	#4
*mischifous* GT: radiodank	Yea, it was. But now its usless.

01-24-2007, 07:42 AM	#5
ll XzoRcisT ll 7S Enthusiast	I thought this didn't work anymore.

01-24-2007, 07:58 AM	#6
Demonspeed16 Member	thanx for bumping a 2 yeard old thread and it doesnt matter cuz there is no more clan rank

01-24-2007, 05:10 PM	#7
ll XzoRcisT ll 7S Enthusiast	Quote: Originally Posted by mayortheslayer thanx for bumping a 2 yeard old thread 2 years? This thread was created 4 weeks ago.. lol

01-24-2007, 05:14 PM	#8
~~CaptainEinstein~~ BANNED	i would still be cool

01-24-2007, 05:42 PM	#9
*mischifous* GT: radiodank	Quote: Originally Posted by ll XzoRcisT ll I thought this didn't work anymore. I said that, look at the post above you...

02-17-2007, 06:18 PM	#10
indianb0y42 7S Enthusiast	i did it once, and it didnt work for me. i dont kno wut happened