Getting Connected With ICS Sharing

[ADV1L]

This is not typically done (wired, for wireless it's common), but some ppl use this method and it can still be used to 'bridge'
it is useful when u have a laptop or an older version of windows

U need two ethernet ports or a usb modem.

run an ethernet cable from ur router or modem to ur pc
then run a crossover ethernet cable from ur pc to ur xbox*

*u don't have to use a crossover:
if ur using cain and able (see the appropriate tut)
if u have a router/switch/hub connected between ur pc and ur xbox

to share the connections go to the control pannel and open up the network connections.

u should see two or more connections to the internet (ie wireless, local area connection 1, lac 2, firewire, etc)

select lac 1 (or the one giving ur comp internet) right click and go to properties.
in the advanced tab enable ICS

also check the other box there (it says 'allow other computers to ....')




:!: now this isn't everything

now that u have ics enabled try signing into xbl with everything (ip and dns) set to auto-detect

that should do it

:idea: troubleshooting - of course u can't get connected so just follow this guide and try after every paragraph. if this still doesn't do the trick just send me a pm

make sure u have the right connection shared. u should be able to connect to the internet on ur pc still.

now that u have everything set to auto-detect look at the ip on ur xbox (in the troubleshooter screen go to settings then ip) and copy down all the info and put it in manually.

still no? then u probably need to fix the dns. right click on the shared connection in the network connections on ur pc and click on status.

now go to support and click on details

copy any necessary info to fill in the dns info on ur xbox.

last resort..... look up the gateway ip from the shared connection (look at the status again) now manually put that in to the unshared connection (right click the connection, go to properties,

now in the second scroll down menu highligh tcp/ip connection

and click properties,

in the ip window u wanna fill in the gateway info like i said earlier)



hopefully that helps. that's as far as i've been getting everytime i use ics.

founded by ADV1L

Solving ip conflicts with ics:
If u followed my tut correctly, it will not be ur xbox's problem since u allow it to automatically detect an ip. And if u can get on the web it wouldn't be ur computer's problem

My guess is that no one in ur house bothered to configure ur router. This could present a problem, since enabling ics defaults ur wired connection to the ip 192.168.0.1 (which could also be ur router's ip).

To fix this - in the network settings go to the properties of ur wired connection, scroll down the 2nd window to tcp/ip and highlight it. click on properties. There u will see that the ip is set to 192.168.0.1. Now that ip is in conflict - so u wanna change it - but only change the last part. (ie 192.168.0.10).

[Eddi3 Barn]

Can u bridge with this?

[l Krafty l]

Yes, this is known as "Laptop/Wireless Bridging"

[Eddi3 Barn]

Oh ok, I did it on my computer though when i bridged the connection it wouldnt work my connection were connect and i did the cmd and netsh thing but it still didnt work for me?

ICS works but i cant force host, and above i was talking about bridging me connections

[l Krafty l]

Please post your questions here:
http://www.se7ensins.com/forums/network-bridging-help/

[loogash]

can you plezz write how to solve the ip conflict problem more as its not really described very well. soz for my spelling im **** lol

ive done every thing you sed to doo ive fixed my ip conflict but now i keep failing the MTU test on my xbox 360!!! grr now what do i do?

k right this is even more annoying ive done and raised my mtu and i some times fail the icmp test now. but when i do get onto xbox live its sometimes lags when i go onto my friends lists and then randomly signs out lol

[Glocks Burn]

how do you fix a ip conflict

[ADV1L]

guys - an ip conflict means that something else on your network has the same ip.

you can fix this by changing the ip from the TCP/IP properties, as I said in the guide
the only thing the guide really lacks there is a picture, hope that you don't get lost over missing a picture, lol.


where it says 'ip address' simply put a different ip, such as 192.168.0.110

[PhoLuM]

how do i get to internet protocol?