how to mod halo 2 using dothalo.
requirements
1. aio v2
2. dothalo and the resigner ill be using are in there
3. dune.map or any other map you want.
in this tutorial ill be teaching you how to
1. run fast
2. jump high
3. auto aim
4. automatic guns
5. 1 hit kills
6. how to put br as defaut weapon
how to run fast
Ok to get started. open up dothalo. then go to file in the top left corner. and click on it. then slect open. select the map you want. ill be using dune.map (relic) for this example. go to the tags. in the big white space click the plus sign next to the map you chose then scroll down to [matg] globals. then click on it. then click on globals/globals. let it load and then go to tag editor and go to the bottom eight and change them to what you want. the top eight will not do any thing for you.
i usally put mind like this.
walking speed for. 11
rev. 10
side. 10
accel. 80
thats how you run fast.
how to jump high
now you will want to scroll up and click on the tag [bipd] biped. then you will see on the tag editor- jump height. if you want to be able to reach the top of relic put it on 17. thats how you jump high.
how to apply auto aim
first scroll down to [weap] weapon. then scroll down to were it says battle rifle and click on it. then on the tag editor scroll down to were it says aquire target distance. and type in 100000. then beneath it in the deviation angle 1cf type in 360. then in auto aim range 1cf type in 100000. then put 0 in the two beneath it. then scroll down to were you see clip. put it at zero. and then type in all the blanks like this.
10000
10000
1
10000
10000
10000
10000
then scroll down further and put the projectile at 0 and make sure that the m.r.o.f is at 15 on both of them. then put the shots per burst at 3. and the minimum spread at 0 and the maximum spread at 0. and the muzzle climb at 0. then go to the top of dothalo and click on windows and click on dependencies.scroll to the right and click on
(proj.-objects\weapons\rifle\battle_rifle\projectiles\bat tle_rifle_bullet) now above that there is n arrow and press it. go down to sniper. make sure you click the one that has bullet at the end. now save changes.thats how to get auto aim.
1 hit kills
now go backto tags and go to [jpt!] damage effect. and click on it. scroll down to sniper. the one that has bullet at the end.and then click on it. go to tag editor. and put
minimum damage- 10000
damage min -10000
damage max- 10000
thats how to make every hit one shot kill.
automatic guns
now save changes on the tags. then close map. now exit dothalo and go to aio and the entire map editors and open up h2x. then open the same map as before. now scroll down to [weap] weapon and click on the batle rifle. then click on meta editor to the right. then on the left click on firing type and change trigger delay to 0.then click on projectil and change trigger delay to 0.bullets per shot to 3. and muzzle climb to 0.now in the bottom right corner click on save changes. then click save changes on the left side. now close h2x.thats how to get automatic weapons.
how to put br as default weapon.
now open back up dothalo and open back up the map.go to the tags and scroll down to
[itmc] item collection. click on it and go to the smg. then click on the smg. go to dependecies and click on the smg. scroll down to the br and click on it. there you go. now just save changes. then go up to the top and click on windows. click map tools. then hit the button fix encryption. now close dothalo.
how to resign the map.
go to resigners on aio v2 and click on coolspots resigner. when it comes up click on open map and open the map you modded. then click resign. it will say complete. then your finished. you have now fully modded your first map.
tell me how i did with out pics. i tried my best.
i think its a really good tut. even though it does not have pics.
how to mod halo 2 using dothalo.
Linear Mode
