Yelo v1.5 Devcam/trainer

[Last Faith]

I did not make this tutorial
It was made by xbox7887 from halomods.com

If you don't know how to use trainers, I suggest you checkout xboxscene.com for further information.

Along with the trainer, you must also transfer over the "config_v1.5.inc" file to "E:/TDATA/4D530064/". If you fail to do so the trainer will not function properly and immediately go into wireframe at the press of a button. Since I haven't gotten around to writing a editor for the trainer config file, if you would like to make your own changes, you can refer to the included "config_v1.5.txt" which maps out all values. Every combo and a few other options can be edited via the trainer config file.

Note that some of the cinematic and lighting options are experimental so if you don't like them, don't use them

-This trainer will only work with the Xored ETM Launcher v2.2 (due to memory allocation issues) so be sure to download that before use.
-Please refer to Aequitas' UST post for all information regarding screencap recovery.
-If you are using a mac computer you will need to download a different deswizzler.
-You can grab source examples here and here.
-Grab the config editor here.
-Having trouble with the UST? Try the alternative.
-For those of you that have been complaining about the 1.1 update, click the link to check out Snave's mainmenu mod.

Configuration:
===========
dpad-up = increase cam speed*
dpad-down = decrease cam speed*
dpad-left = decrease look speed*
dpad-right = increase look speed*
lthumb+rthumb = toggle timefreeze
lthumb+dpad-up = increase vertical look shift
lthumb+dpad-down = decrease verical look shift
lthumb+dpad-left = increase horizontal look shift
lthumb+dpad-right = decrease horizontal look shift
lthumb+black = disable cinematic mode
lthumb+white = enable cinematic mode
lthumb+back = stillcam
rthumb+dpad-up = decrease camera depth
rthumb+dpad-down = increase camera depth
rthumb+dpad-left = increase fov
rthumb+dpad-right = decrease fov
rthumb+A = save camera state (shifts, fov, and depth)
rthumb+B = load camera state (shift, fov, and depth)
rthumb+X = save gamestate
rthumb+Y = load gamestate
rthumb+back = cutscene camera
back+dpad-up = first person perspective
back+dpad-down = third person perspective
back+dpad-left = chasecam perspective
back+dpad-right = devcam perspective
black+dpad-up = increase Z cam shift
black+dpad-down = decrease Z cam shift
black+dpad-left = increase Y cam shift
black+dpad-right = decrease Y cam shift
white+dpad-down = auto hires grabber*
white+dpad-left = vidcap (10fps)
white+dpad-right = 360 degree shot*
white+back = screenshot
rtrigger = move up along Z axis*
ltrigger = move down along Z axis*
A+dpad-up = letterbox toggle
A+dpad-down = wireframe
A+dpad-left = hud toggle
A+dpad-right = ai toggle
A+black = decrease ambient light brightness
A+white = increase ambient light brightness
B+dpad-up = teleport to current camera coordinates
B+dpad-left = decrease gamespeed
B+dpad-right = increase gamespeed
X+dpad-up = secondary light vertical increase
X+dpad-down = secondary light vertical decrease
X+dpad-left = secondary light horizontal decrease
X+dpad-right = secondary light horizontal increase
X+black = decrease secondary light brightness
X+white = increase secondary light brightness
Y+dpad-up = primary light vertical increase
Y+dpad-down = primary light vertical decrease
Y+dpad-left = primary light horizontal decrease
Y+dpad-right = primary light horizontal increase
Y+black = decrease primary light brightness
Y+white = increase primary light brightness

* while in devcam

Checklist:
=========
-Have you read the entire post
-Are you using Xored v2.2 Launcher with the correct config settings?
-Did you tranfer over the "config_v1.5.inc" to "E:/TDATA/4D530064/"?
-Did you disable the Autoupdate in your trainer options menu?
-Do you have only one controller plugged in, and is it in the first controller port?
-Do you have a semi-functional brain that posesses the knowledge required to run such a fine piece of software?


Credits:
========
Kornman00 - Halo junkie & co-author of this trainer
Bitterbanana - Camera god
Dootdoo - Assembly & mentor
Acidflash - Xored ETM Launcher
ddh - XDKAssist
Khuong - Sexy ***** +1000 respect
trepdimeflou - Uber beta tester & suggestion box extraordinaire
Rest of the halo community (Especially Tural:wink

[krazy]

Heres the 2.2 xored mini launcher for those who are to lazy to get on xbins or torrents RapidShare Webhosting + Webspace

[Last Faith]

^_^bump^_^

[davetwo2]

:unsure::unsure::unsure::unsure::unsure: whenever i click xored trainer then it goes there when i click the game the screen just flashes

[Killzone6666]

hey i need help when i click on halo2 on the luncher it just flashes can someone help me
plz

[The One 386]

what do i do with the Xored ETM Launcher v2.2 where does that go and what does it do

[Alltimemodderman]

ok, the xored files go in to the app folder. the program its self launches the yelo trainer. because yelo is a trainer. i have been haveing problems with this though. it dosn't work right. i think my used xbox is broke.any way that is what u do. there is more to it, but that is the bacic thing to do.

[mschledy]

i think ive done everything right but whenever i go onto the xored launcher and select "Yelo:Halo2 (xbox)" nothing happens, the xored music is still playing in the background so i know that its not frozen, can anybody help?

[Dotkito]

im a noob at this, how do you get all of this on there???

[Xandan]

well you put the Xored ETM Launcher (the mini folder you have when you extract it) into "E:/Apps" (make the folder if you dont already have it) then you put the "yelo.etm" file into "C:/trainers" (again make the the folder) then you put "config_v1.5.inc" into "E:/TDATA/4D530064" and there you go XD

[mschledy]

hmmm, somebody told me it sometimes messes up on xbmc, i might need to use a different dashboard i think >.<

[yoyboy9]

IM having trouble also with the launcher like said before it just flashes and doesnt do anything. :cry2: Im sad


Im a genius i just figured out how to do it i feel stupid though. Well all you have to do is press X to start it up yay

[Xandan]

pressing "x" does not launch yelo...

[NNNY]

im new at this and i followed all the steps but didn't get the part it said Configuration. Do i have to make that or is it just instructions and i put the config v1.5.inc in the tdata but when i startup Xored it doesn't do nothing no music it is just in a screen no option or anything all i see is that blue ziggy thing. Thx for any help!!!!!!!!!!!!!!!

[Venomous Fire]

why do people have trouble with Yelo still? Do a quick search and you would find this STICKY

[NNNY]

And somebody one day should make a video to go along with the tutorial instead of pics and upload it on youtube. THAT WOULD BE COOL!!!!!!!!

[tazzie 02]

How do you install Xored Mini Launcher? Sorry... I'm completely new to all of this.

EDIT: Dont worry... I read Zones tut and it all became clear.

[Xandan]

did you read what i put? or the tut Venomous fire put?