how to stealth check and burn 360 games

[Bac0n]

TUTORIAL IS NOW OUT OF DATE. ABGX Replaced mulleter so follow the tutorial posted by another member.

I no longer pirate games/play burned games. I am updating this one last time. Once this information is not valid you are on your own. Since this has over 135,000 views i assume it adds traffic to the site and helps alot of people. Enjoy!

WARNING! If you follow this tutorial and do not have iXtreme 1.4 you could possible be banned from Xbox live. I do not cover checking the Security sector with Kreon Checker for older versions if iXtreme. I am not responsible for bans if you follow this tutorial. Play on xbox live at your own risk!

Tools needed
1)A Samsung DvD-ROM drive for PC flashed with kreon Firmware
2)The game you wish to copy
3)The tools found in the download below
4)A Blank double Layer DVD
5)A dual layer dvd burner that preferably supports bitsetting
6)Firmware modified xbox 360

DOWNLOAD

http://rapidshare.com/files/145846550/360_burning_tools.rar

I have used the programs found in this download with no problems. If you are suspicious then don't download simple as that. Get them from another source.

Lets Get Started!
For this tutorial I will be using Saints Row 1

Part 1)Using Xbox backup creator to rip the game image

1a)Open up xbox backup creator and insert your game into your Kreon DVD drive. Make sure your Kreon drive is the drive you have selected. If the game is recognised it will say the size is between 5MB and 7MB(usually)


1b)Click Drive tools and Unlock Drive, the disc size should change to 6.81GB


1c)Go to the options tab. Select the drive types you have and disable Splidvid, set the read speed to 4x.(spltvid is not needed)


1d)Go back to the read tab. Set the image style to complete backup and press start. Select a place to save the game and the game should begin dumping.


When the read is complete, you will have 2 files in the folder you saved the ISO. A 7.05GB ISO file, and a small DVD file. The game should take about 30 minutes to dump.

Step 2)Stealth Checking.

2a)Open XDvdmulleter, select view ISO details and press next.


2b)Browse to your ISO and click next.


2c)If you get this screen continue to the burning process. Make sure the game matches your xbox's region!


Part 3)Burning your game

Step 3a)Open IMGburn. Browse to your .dvd file. Make sure the correct dvd burner is selected. Insert Blank DVD+R DL into your DVD burner. Make sure the Layerbreak is 1,913,760! Set the read speed to 2.4x! Click burn, wait 40 minutes and test.

If you get any errors that say"Unable to lock volume for exclusive access", close all of your media player/other burning software.

[Butterscanfly]

wow nice tut but i alwats just open xbc and click stealth check and if it passes then i burn it ??

[Bac0n]

You could do that. Im just paranoid and check it with multiple programs to make sure that they all pass. And if they do im positive it will burn and play correctly. Thanks for feedback

[Soapy]

Is stealth and XBC the same? and does XBC check 360 games also?

Asking cause im new 2 game burning.

[Bac0n]

Quote: Originally Posted by SoapyChicken

Is stealth and XBC the same? and does XBC check 360 games also?

Asking cause im new 2 game burning.

Xbox Backup creator will check 360 games. Which is what i used it this tutorial.

[Amurka]

Very nice tutorial for noobs like me...that is, once I got those tools.

[Venomous Fire]

This tutorial is overdone.... you only need to check using one program....all three of the stealth checks you did checked the same things, DVDMulleter works fine.

As for checking for good kreon rips, thats only assuming you arent on iXtreme 1.4 or higher, on that firmware that check isnt needed, and really on that firmware, none of these are needed because if it isnt stealth the game wont load

[Venomous Fire]

All three of those programs to check for stealth all check for the same thing, you only need to use one of them.... Also the Kreon rip tester, thats only if you dont use iXtreme1.4 or higher, it fixed that issue..

On a side not if you have iXtreme anything it wont boot a non stealthed game

[Bac0n]

Make sure to do the kreon checker, that is very important. If its a bad kreon rip, the game will still play but you can get detected!

[Crackmatt]

THANK YOU

I am doing this tonight, just bought a 10 pack of Sony DVD+R DL's, and going to burn CoD4 and RB6V2 after baseball practice.

[Bac0n]

Added download for the tools needed.

[Insomniac190]

For some reason I get this error before I burn. It might be nothing but I don't wanna risk it and waste this disk.

" There doesn't appear to be enough space on the disk to burn this image

Image size: 3,825,924 Sectors (7,472 MB)

Disk size: 15,872 Sectors (31 MB) "

I have maybe 9 gigs of free space left could that be it? I thought I only needed about 7 gigs then burn this disk then delete the ISO to clear it up.

I have a LiteOn as well and it comes up as ATAPI or something and it does do DL disks.

Everything checked out good on the security checks too.

A pic of the screen with the settings and whatever:

http://i33.photobucket.com/albums/d6...acNC/11234.jpg

Oh and the disk is Verbatim.

[Bac0n]

Are you using a blank disc, it doesnt sound like it.

[Venomous Fire]

Burn the .dvd file, not the .iso

[Insomniac190]

Quote: Originally Posted by Venomous fire

Burn the .dvd file, not the .iso

I was doing the ISO since I do know have a .dvd file and I thought the tutorial said if I did not have a .dvd file that I could do steps 3 and 4.

I will get some more DVDs tomorrow Bac0n might be right cause I have had this one for a while and maybe I tried it and it failed and I forgot to throw it away or something as it was on a spindle not a sealed case.

[Venomous Fire]

to make a .dvd file open up the ISO in DVDMulleter, and under other options or something, there is a button to make .dvd file, save as what it suggests. The .dvd file sets the layerbreak. without that the burner wont know when to go to the next layer and the disc wont have enough room for the ISO.

[Bac0n]

Quote: Originally Posted by Venomous fire

to make a .dvd file open up the ISO in DVDMulleter, and under other options or something, there is a button to make .dvd file, save as what it suggests. The .dvd file sets the layerbreak. without that the burner wont know when to go to the next layer and the disc wont have enough room for the ISO.

You odnt need a .dvd file, you can set the layerbreak yourself....

[Soapy]

I got a question, im just noticing this now but when i put my write speed to 2.4 it changes it to 1.5 or it will switch automatically. But my burns work fine but it takes forever to burn. Any suggestions?

[fbi101]

how do i fix a game that dont have stealth on it?

[Venomous Fire]

put stealth into it, DVDMulleter can fix it usually, if not you have to find the stealth files online