How to flash a BenQ Xbox 360

**Venomous Fire** · 03-24-2008, 10:05 PM

uhhh, Theres only one version stock, but there are multiple iXtreme for it, just go onto Xbins and get the latest from there

**combatburt** · 03-24-2008, 10:20 PM

Well i meant different versions of ixetreme. I flashed my benq when they first put the firmware out for it. I just wanted to know if it had everything fixed with the first version? Like the kreon thing.

**Venomous Fire** · 03-24-2008, 10:28 PM

Yes, 1.4 fixed that and 1.41 fixed a few bugs, no security fixes in 1.41 though, might wanna update to 1.4

OHB0Y2K4 · 03-24-2008, 11:37 PM

Quote: Originally Posted by BxMods

im confused on which sata card to get from tigerdirect.com

can someone point me in a direction

thnk you in advance!

Got my new pci sata from newegg the rosewill rc-212 and left the jumpers at factory.
This is a great card and it cost around $20... Highly recommend it!

~~Soapy~~ · 03-25-2008, 01:54 AM

i just flashed my BenQ drive about 3 hours ago. A little confusion but it works!

Bac0n · 03-25-2008, 02:02 AM

Good tutorial. But i prefer iprep with MTKflash the commands are so much eaiser.

**Venomous Fire** · 03-25-2008, 04:51 PM

When this was written Iprep wasnt compatible with BenQ drives

I still prefer DosFlash though

vXxH2KxXv · 03-26-2008, 05:38 PM

how do i find out what my current sata chip set is?

**Venomous Fire** · 03-26-2008, 06:37 PM

I dont know that, best bet is to just buy a new one, that way you are 100% sure

vXxH2KxXv · 03-26-2008, 06:39 PM

is there any way i could use my laptop to flash?

**Venomous Fire** · 03-26-2008, 06:54 PM

uhhh, I dont think so, you would need to have the right sata chipset, then be willing to take it apart and all that jazz

vXxH2KxXv · 03-26-2008, 08:55 PM

is there someone i could send this too? i will pay

**Venomous Fire** · 03-26-2008, 10:11 PM

If your willing to pay shipping both ways Ill do it for 5 bucks

vXxH2KxXv · 03-27-2008, 01:02 AM

whats your aim?

***superaison*** · 03-27-2008, 01:26 PM

Hate to say this, I use these pre-programs out no like iPrep, this is kinda the manual way, I use to do it this way, then realized it took too long.

I would suggest iPrep101.

**Venomous Fire** · 03-27-2008, 08:47 PM

This way only takes what, 5 extra seconds? Its not that hard to do, and like I said, when this tut was made, iPrep didnt support BenQ, infact, DosFlash had barely gotten support for it

Bac0n · 04-01-2008, 07:50 AM

I like this tutorial better
Total Noob Tutorial For Flashing Benq Vad6038 - Scenyx Entertainment Community

Same tutorial, eaiser to follow. Even the same pictures!

**Venomous Fire** · 04-01-2008, 11:11 AM

Thats where I got the pics from, it give no credit for them

But anyways, if you want to use that fine, but mine skips the steps that arent required and puts things in easier to understand terms for those new to flashing.

Oh and here is a suggestion, HOW ABOUT WE STOP THE "I PREFER THIS TUT OVER YOURS" POSTS IN HERE EH? How about we try that one for a little while

If you prefer another tutorial hows about shut your mouth and go do that one, or here is an idea, WRITE YOUR OWN? I didnt write my own tut by hand in order just to have people constantly come in here saying "You guys should use tut x or tut y"

sampson · 04-06-2008, 04:52 PM

Wow that was like a whole new language. So what does doing all this gain you?

**Venomous Fire** · 04-06-2008, 05:13 PM

This allows you to play backed up games on your 360

04-01-2008, 11:11 AM	#78
Venomous Fire Novice	Thats where I got the pics from, it give no credit for them But anyways, if you want to use that fine, but mine skips the steps that arent required and puts things in easier to understand terms for those new to flashing. Oh and here is a suggestion, HOW ABOUT WE STOP THE "I PREFER THIS TUT OVER YOURS" POSTS IN HERE EH? How about we try that one for a little while If you prefer another tutorial hows about shut your mouth and go do that one, or here is an idea, WRITE YOUR OWN? I didnt write my own tut by hand in order just to have people constantly come in here saying "You guys should use tut x or tut y" Last edited by Venomous Fire; 04-01-2008 at 11:44 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

		Se7enSins Forums > Xbox 360 Gaming > Xbox 360 Tutorials > Firmware Hack Tutorials
How to flash a BenQ Xbox 360

03-24-2008, 10:05 PM	#61
Venomous Fire Novice	uhhh, Theres only one version stock, but there are multiple iXtreme for it, just go onto Xbins and get the latest from there

03-24-2008, 10:20 PM	#62
combatburt Premium Member	Well i meant different versions of ixetreme. I flashed my benq when they first put the firmware out for it. I just wanted to know if it had everything fixed with the first version? Like the kreon thing.

03-24-2008, 10:28 PM	#63
Venomous Fire Novice	Yes, 1.4 fixed that and 1.41 fixed a few bugs, no security fixes in 1.41 though, might wanna update to 1.4

03-24-2008, 11:37 PM	#64
OHB0Y2K4 Novice	Quote: Originally Posted by BxMods im confused on which sata card to get from tigerdirect.com can someone point me in a direction thnk you in advance! Got my new pci sata from newegg the rosewill rc-212 and left the jumpers at factory. This is a great card and it cost around $20... Highly recommend it!

03-25-2008, 01:54 AM	#65
~~Soapy~~ BANNED	i just flashed my BenQ drive about 3 hours ago. A little confusion but it works!

03-25-2008, 02:02 AM	#66
Bac0n Senior Member	Good tutorial. But i prefer iprep with MTKflash the commands are so much eaiser.

03-25-2008, 04:51 PM	#67
Venomous Fire Novice	When this was written Iprep wasnt compatible with BenQ drives I still prefer DosFlash though

03-26-2008, 05:38 PM	#68
vXxH2KxXv Member	how do i find out what my current sata chip set is?

03-26-2008, 06:37 PM	#69
Venomous Fire Novice	I dont know that, best bet is to just buy a new one, that way you are 100% sure

03-26-2008, 06:39 PM	#70
vXxH2KxXv Member	is there any way i could use my laptop to flash?

03-26-2008, 06:54 PM	#71
Venomous Fire Novice	uhhh, I dont think so, you would need to have the right sata chipset, then be willing to take it apart and all that jazz

03-26-2008, 08:55 PM	#72
vXxH2KxXv Member	is there someone i could send this too? i will pay

03-26-2008, 10:11 PM	#73
Venomous Fire Novice	If your willing to pay shipping both ways Ill do it for 5 bucks

03-27-2008, 01:26 PM	#75
*superaison*	Hate to say this, I use these pre-programs out no like iPrep, this is kinda the manual way, I use to do it this way, then realized it took too long. I would suggest iPrep101.

03-27-2008, 08:47 PM	#76
Venomous Fire Novice	This way only takes what, 5 extra seconds? Its not that hard to do, and like I said, when this tut was made, iPrep didnt support BenQ, infact, DosFlash had barely gotten support for it

04-01-2008, 07:50 AM	#77
Bac0n Senior Member	I like this tutorial better Total Noob Tutorial For Flashing Benq Vad6038 - Scenyx Entertainment Community Same tutorial, eaiser to follow. Even the same pictures!

04-06-2008, 04:52 PM	#79
sampson 7S Enthusiast	Wow that was like a whole new language. So what does doing all this gain you?

04-06-2008, 05:13 PM	#80
Venomous Fire Novice	This allows you to play backed up games on your 360