![]() | ||
How to flash a BenQ Xbox 360
| ||
![]() |
| | LinkBack (1) | Thread Tools | Display Modes |
| | #441 |
| 7S Enthusiast | Re: How to flash a BenQ Xbox 360 i have a benq . i opened my xbox now what do i need to find look for to see if i can flash my xbox optical drive? i have a benQ. what do i need to look for to see if i can flash my xbox optical drive? Last edited by azzhair; 01-03-2009 at 05:15 PM. Reason: Automerged Doublepost |
| | |
| | #442 |
| Novice ![]() | Re: How to flash a BenQ Xbox 360 if you have a BenQ then follow this thread |
| | |
| | #443 |
| Novice | Re: How to flash a BenQ Xbox 360 im really confused on how to make my firmware. So like where do I put my orig.bin file for the 1.5 firmware? |
| | |
| | #444 |
| Novice ![]() | Re: How to flash a BenQ Xbox 360 |
| | |
| | #445 |
| Novice | Re: How to flash a BenQ Xbox 360 Hello Venomous. I have a yellow cable in the 3rd slot of the picture instead of a red one. Is this still an BENQ? Many Thanks. Oops.. I meant instead of a white cable Last edited by abhiace; 01-05-2009 at 02:29 AM. Reason: Automerged Doublepost |
| | |
| | #446 |
| Novice ![]() | Re: How to flash a BenQ Xbox 360 that means its a Lite-On |
| | |
| | #447 |
| Novice | Re: How to flash a BenQ Xbox 360 Hi, I'm new to this and I have a question. Instead of using a PCI Sata Card, can I use my motherboard? |
| | |
| | #448 |
| BANNED | Re: How to flash a BenQ Xbox 360 |
| | |
| | #449 |
| Novice | Re: How to flash a BenQ Xbox 360 |
| | |
| | #450 |
| Member | Re: How to flash a BenQ Xbox 360 Great tutorial by our staff member here. Be careful with the LiteOn though, read as much as you can about it before you do it. ----------------- @ CaSh I'm afraid not but for like $15 you can get it. Here: http://www.newegg.com/Product/Produc...11&Tpk=via6421 Last edited by tOxiC x; 01-05-2009 at 11:05 PM. |
| | |
| | #451 |
| Novice | Re: How to flash a BenQ Xbox 360 Thanks Toxic, I'll read that up. Are the LiteOns new for the 360s(the yelow wire in the 3rd slot)? Are there specific things you would recommend being watchful for on these? Thanks much. |
| | |
| | #452 |
| Member | Re: How to flash a BenQ Xbox 360 They are new, but not too new. They are the newest of the drives, but over a year old now. Nothing particular to be watchful for, it's just a lot of people been having trouble with them. If you follow step by step you will be fine. |
| | |
| The Following User Says Thank You to tOxiC x For This Useful Post: | abhiace (01-12-2009) |
| | #453 |
| BANNED | Re: How to flash a BenQ Xbox 360 Alright thanks toxic, appreciate it. |
| | |
| | #454 |
| Novice | Re: How to flash a BenQ Xbox 360 hi i want to know which dvd drive is the best and simple to do firmwave hack and also, which 360 dvd drive let you play online after you have done firmwave hack many thanks |
| | |
| | #455 |
| Novice ![]() | Re: How to flash a BenQ Xbox 360 All drives let you play burnt games online, Hitachis are prolly the easiest, then its just down to what you are good with |
| | |
| | #456 |
| Novice | Re: How to flash a BenQ Xbox 360 i though MS ban you if you play backups online on 360 or is there a new firmwave out that lets you without detection that am not aware of? ok am going to go out and buy 360 which dvd drive should i get, which dvd drives reads dl discs with less errors any reccomendations thanks |
| | |
| | #457 |
| Novice ![]() | Re: How to flash a BenQ Xbox 360 When they detect it they do ban And you will get a Lite-On if you buy new |
| | |
| | #458 |
| Novice | Re: How to flash a BenQ Xbox 360 that means if i buy new i will get Philips-LiteOn dvd drive? is this hard to do? so shall i buy this one or find a samsung drive? thanks |
| | |
| | #459 |
| Novice ![]() | Re: How to flash a BenQ Xbox 360 uhh, Lite-On is the hardest to flash, you have to buy $60 worth of extra hardware |
| | |
| | #460 |
| Novice | Re: How to flash a BenQ Xbox 360 Hi I just bricked a benq drive its ****ed just checked the key and its all 7777777777777777's. I thought i would try out the new Ixtreme 1.5 with iprep 8.8 what a load of ****, I done 30+ drives before no probs flash went smoothly but when i went to use it was a brick. I was just wondering if any one had a tutorial on how to get the key off the motherboard I know it can be done and I know know its probly beyond me but its got to be worth ago. So if any one has it or can link me to it thank you GINY |
| | |