Computer won't recognize Samsung drive...

[Col2eight]

Well, the past few days I've been having troubles flashing my 360. I have a Samsung and I have the right PCI card and the sata cable connecting them. And, yes, it is in the right spot. I've tried so many methods and it just won't recognize it. JungleFlasher can't find it and neither can DosFlash. I'm running on 32bit Windows 7. I'm having a ****ty weekend, so please, help me.


I started out using this tutorial, but obviously like I said, it can't detect my drive. Than I went to this tutorial, but I needed a port number that I couldn't find. Now, when I think I found it the port number, the computer can't find the drive. I've installed PortIO.

Anyways, any questions, please ask. I can't get it to work to save my life.

Here's quick pic of jungle flasher and DosFlash:

[EclipseModz]

Try booting into DosFlash and see if it works.
How to flash a 360 Benq drive using DosFlash 1.8

Yes i gave you a BenQ tutorial. They are both flashed the same way.

[Col2eight]

I told you, DosFlash doesn't detect it either.

[EclipseModz]

Have you even tried to boot into DosFlash?

[Col2eight]

Quote: Originally Posted by EclipseModz

Have you even tried to boot into DosFlash?

Nope. XD I'll try it after I'm done playin CoD. Thanks.

[EclipseModz]

Try it and if it still doesnt see the drive come back in here.

[Col2eight]

Thanks, but it did nothing. It did the same thing iPrep did. It says that no atpai or w/e devices are found.

[EclipseModz]

What are you turning on first? 360 or PC?

Also did you remove your VIA drivers?

[Col2eight]

My PC. And yes, I removed them. I used that huge JungleFlasher.pdf tutorial. I didn't get very far though, obviously.

[EclipseModz]

Have the 360 on first.

Also re-install your via drivers. Then try again. I have never removed my drivers and I have flashed over a 100 drives and never had a problem with having the drivers installed

[Col2eight]

Turning the 360 on first didn't work. I'll try re-installing the drivers now.