codwaw iso moding video

[o m1a1 o]

YouTube - COD:WAW Insane Glitches, MODZ, and...

watchhhh this is crazy its me and some of my other friends modding comment

You Tube

another modding proff video




http://rapidshare.com/files/297731976/Code_post_GFX.rar my file




Now for turtorial

What you need~
-Flashed Xbox 360
-Codwaw iso
-these tools MEGAUPLOAD - The leading online storage and file delivery service
-abgx360 http://abgx360.x-scene.com/abgx360_v1.0.1_setup.exe


1. Extract the included tools, and install hxd editor and simplyzip.

2. Open wx360, click file open and browse for your waw iso

3. Scroll down and find/extract these two files:
code_post_gfx.ff
default.xex

4. open code_post_gfx.ff. in fastfile tool and click on Decompress

5.It will make a code_post_gfx.ff.dump file.

7.Open HxD and go to file open and find your code_post_gfx.ff.dump

8.Type in buttons_default

9.Right after buttons_default.cfg.unbind BUTTON_RSHLDR you will see two ..'s this is where you begin putting in the dvars the hex code for the .. them is 0D 0A that is necassary otherwise the mods wont work

10.after the 2.. start putting in your dvars
these are mine from the file i uploaded
and after every dvar you finish putting in you have to click on the first . in .. and change the hex value to 0D 0A this is so important
..set PartyConnectToOthers "0"
..set player_sustainAmmo "1"
..set bg_fallDamageMaxHeight "999"
..set bg_fallDamageMinHeight "998"
..set cg_drawFPS "1"
..set cg_laserForceOn "1"
..set g_knockback "99999"
..set g_gravity "275"
..set g_speed "375"
..set jump_height "850"
..set perk_weapRateMultiplier "0.001"
..set player_sprintUnlimited "1"
..set player_lastStandBleedoutTime "555"
..set magic_chest_movable "0"
..set cg_scoreboardpingtext "1"
..superuser "1"
..set phys_gravity "99"
..set Revive_Trigger_Radius "99999"
..set player_meleeRange "999"

you can only put as many dvars until you reach here
http://img199.imageshack.us/img199/1986/97074589.jpg

MAKE SHURE THERE ARE 2.. before each dvar

11.IF YOU ARE DONE FILLING OUT YOUR DVARS AND THERE IS STILL NUMBERS LEAFT FILLLLL THEMMMM OUTTT WITH SPACESSSSSS

12.for you binds like no noclip god give all and timescale you have to scroll down till you see ..bind dpad

13.after ..bind dpad" you do this ..bind dpadup or whichever 1 you are on type in "noclip" and fill the rest of the letters in with spaces so it looks like this ..bindDPADUP"noclip" ..bindDPADDOWN"god"
heres is a pic if you are confused
http://img199.imageshack.us/img199/355/25697529.jpg

these are all the binds that you can put in that i know of
god, noclip, give all, toggle timescale 1 2 0.5

14.your done with that now

15.now go to where ever you saved your file to right click it go to rename and delete the .dump part you might have to delete you original code_post_gfx file for you to rename it

16.Open simplyzip go to external progs> ZLIB (pack/unpack) and click your modded CODE_POST_GFX and click on compress you should get a code_post_gfx.zlp

17.Open the code_post_gfx.zlp in HxD,Click on edit>insert bytes and use the settings as seen in the picture, also click on the dec icon right below the byte insert
http://img197.imageshack.us/img197/5090/12243717.jpg

18.you should have 12 .'s at the begining of your file.if you have more delete them until you have only 12, now click on the left side where it shows the hexvalues and start overwriting the dots with these hex values in order 49 57 66 66 75 31 30 30 00 00 01 83 so if you click on the first dot it will have a hex value of like 00 and you need to change it to 49 and so on for the other 1s as well-it wil end up spelling up IWffu and some other stuff after it

19.Open wx360 and right click on the code_post_gfx.ff and go to replace, find your code_post_gfx.zlp and click open-Do the same with the default.xex

20.open the iso in ABGX360 click on the autofix tab at the top and click on the dropdown box that says autofix threshold and click level 3 let it check and as long as stealth passes you have a 99.9 percent chance of not getting banded

21.open up imgburn click write img file to disk the first 1 click tools -settings-write-click on the layer break thing in the top right and go to user 1 and put this in the little box 1913760


22restart img burn you dont have to put in the numbers again and click write img file to disk unclick verify at the bottom and change the write speed to either 2.4-3-or 4 depends on you burner and click the pic of the file going to the disk and wait for it to burn it will take about 30 to 40 min


23 start up your xbox go to system settings memory hit y and clear system catch

24 to activate mods in a zombie game u have to be host to get the dvars to work hit start button layout default and to get get the binds to work you dont have to be host just hit whatever button you assigned it to




to get my downloaded file to work all you have to do is open wx360 locate the code_post_gfx overwrite it with mine and then locate you default xex and overwrite with mine the run through abgx and burn it

[XxDZxX]

sorry dude i cant really see/ watch it proply coz itz bad graphics and it keeps buffering

[o m1a1 o]

its buffering because of ur internert its my friends camera and i have no problem loading it

[ZyGoMaTiC]

Can you upload your code_post_gfx?

[o m1a1 o]

yea il do it on rapidshare

[ID0NTuseMODZ]

Ya post your file

[a deeper b1ue]

If you post the file, post the region aswell.

[187Modz]

awesome 11/10 to bad i cant flash my xbox, and i cant iso mod, and i cant download a game i already have, and i cant get 6.5 GB disks

[o m1a1 o]

your welcome

bump

[ZyGoMaTiC]

I made a new link for the code_post_gfx and added it to my premium account, so it can be downloaded unlimited times.

I also fixed it for you. You have to rename it from .zlp to .ff.
Here is the new link: RapidShare: 1-CLICK Web hosting - Easy Filehosting

And thanks again for the file.

I made a video using your file.
Here it is:

You Tube

And thanks again.

[a deeper b1ue]

Your vids not working zygo, copy right problems.

[ZyGoMaTiC]

Quote: Originally Posted by a deeper b1ue

Your vids not working zygo, copy right problems.

Re-uploading.

I added a new video.
Here it is hope it works.

You Tube

00:35 Godmode/noclip/give all
00:50 Showing all guns
2:05 Zombie arms!
2:13 Triple tap
4:03 Ray gun crawl
4:14 Firin mah lazah
4:23 Super speed
4:31 10 Sensetivity on super speed
4:44 Slow motion
6:05 "Hammer of dawn"
6:25 Firin mah lazah in teh sky
7:11 Journey to the moon

[a deeper b1ue]

Still saying copy right laws

[ZyGoMaTiC]

I did audioswap. GAYYY.

But here it is with some gay electronica music.

You Tube

00:35 Godmode/noclip/give all
00:50 Showing all guns
2:05 Zombie arms!
2:13 Triple tap
4:03 Ray gun crawl
4:14 Firin mah lazah
4:23 Super speed
4:31 10 Sensetivity on super speed
4:44 Slow motion
6:05 "Hammer of dawn"
6:25 Firin mah lazah in teh sky
7:11 Journey to the moon



It might still say copyright, thats because it takes a little while to change the audio. So check back in a little while.

[lennyirl]

still saying copyright error too

[ZyGoMaTiC]

i know, i gave up.
i did audioswap and got copyrighted on that too.

[o m1a1 o]

send me a friend invt and we can make are own where it wont get copywrite gt is..... getanewgamertag

[o m1a1 o]

tools not working right now