bridging after update

[cdublibow]

I was thinking, since it probably detects your network adapter, there is STILL one OTHER way to bridge self host.

If this doesnt work, im ready to say all hope is lost

first off, all of you should be aware, that in your router, there is a certain thing known as trusted and blocked IP's

well

basically we can simulate putting your FW in high by creating a unique IP range like so

lets say my IP was: 68.54.24.6

Now we would create a blocked range from: 1.1.1.0 to (bungies first IP in the range that it has xolo has it, xolo if you read this replace it with the range) then put in the IP AFTER the last range in bungies then block up to the IP before 68.54.24.6 which would be 68.54.24.5 then block 68.54.24.7 on

Make sure you accept xbox lives IP as well

this should simulate bridging host, through the router, without actually having a bridge running

yeah

[floppy tripod]

IDK if that could work did you try it yourself...if you did tell us the results...

[zZ hacked Zz]

dont work. i have found this tut in all kinds of vip's but it dont work.

[jayboyyyy]

hey that makes no sense. instead of doing that why dont you just add all of bungies ip's to zone alarm and then add xbox lives and then put your internet to high. that is what you are doing anyway when you use to bridge except you took out the cain and abel part of the process. so i dont get how it would work

[xixDEMONxix]

hey- I have found a way to bridge ur self host after the update. This method works about 95% of the time. I have done it and so have my friends and trust me it works. i use a router along with cain and abel and zone alarm. if u want to kno the rest im at p8baller79 on aim and x smellygas x on xbl

thanks-
demon

[Forgoten Dynasty]

or you could stanby for host then force it over at the end of step 3/begining of step 4.............














opps did i say that crap

[l Gob l]

Quote: Originally Posted by forgoten dynasty

or you could stanby for host then force it over at the end of step 3/begining of step 4.............

opps did i say that crap

Does that work anymore? You can bridge after the update, I have done it, but, its like standbying for it actually. It requires timing. Even then, I am not sure if im even doing it right...homer and I were doing it in double team on our other accounts.