Go Back   Se7enSins Forums > Xbox Gaming > Halo 1 and Halo 2 > Halo 2 > Halo 2 > Halo 2 Bridging > Bridging Tutorials

Programs And Guides Listed

This is a discussion about Programs And Guides Listed within the Bridging Tutorials section, where you will Find tutorials on how to Network Bridge (bridge host), Team Standby, lagging out players and Standby here!; Aright, So I Know There Is Like 50 Bazillian Tutorials On This Stuff But I'm Gonna Give Some Going By What I Use, Lets Get Started... Programs Programs Needed: 1. Zonalarm Pro Link: http://dl2.zonelabs.com/bin/free/104...337_000_en.exe 2.



Notices

Reply
 
LinkBack Thread Tools Display Modes
Old 04-03-2007, 09:56 PM   #1 (permalink)
7S Enthusiast
Points: 1,336, Level: 14 Points: 1,336, Level: 14 Points: 1,336, Level: 14
Activity: 0% Activity: 0% Activity: 0%
 
xX Mellowyellow's Avatar
 
Join Date: Mar 2007
Location: Michigan
Posts: 51
Tournaments Joined: 0
Tournament Wins: 0
Gave Thanks: 0
Received Thanks: 0
Nominated 0 Times in 0 Posts
TOTM Award(s): 0
xX Mellowyellow is on a distinguished road
Send a message via AIM to xX Mellowyellow Send a message via Yahoo to xX Mellowyellow
Cool Programs And Guides Listed

Aright, So I Know There Is Like 50 Bazillian Tutorials On This Stuff But I'm Gonna Give Some Going By What I Use, Lets Get Started...

Programs

Programs Needed:

1. Zonalarm Pro

Link: http://dl2.zonelabs.com/bin/free/104...337_000_en.exe

2. Cain And Abel

Link: http://www.oxid.it/downloads/ca_setup.exe

3. Auto Standby v1.1 (Note: These Are The Programs I Use)

Link: http://www.megaupload.com/popunders/...nteractive.php

Bridging

Ok, Now That You've Got The Programs Lets Start Putting Them To Use. 1st I'm Gonna Teach You How To Bridge, Which Is The 1st Step In Learning How To Cheat (If You Want To Cheat), So Be PATIENT!

Cain And Abel

Step 1: Open Up Cain And Abel

Step 2: Click On The Sniffer Tab

Step 3: Click On Start/Stop Sniffer (In The Top Left The Symbol Should Be Exactly The Same To The One On The Sniffer Tab)

Step 4: Now Click The Blue Cross (Near The Top Middle)

Step 5: Check All Hosts In My Subnet And Click Ok

Step 6: Click On The APR Tab At The Bottom

Step 7: Click On Start/Stop APR (The Yellow Symbol Next To Start/Stop Sniffer)

After You Have Done All Of These Steps, You Should Start Getting IP Adresses In The Bottom Box On The APR Tab. If You Aren't In A Party With Anyone The Only IP Adress You Should Have Is Bungies Which Is Currently 65.59.234.161

Zone Alarm Pro

Step 1: Have A Friend Go Make A Party And Set It To INVITE ONLY So Nobody Can Join Except You (So The Only IP Adress You Get Is His)

Step 2: Open Up Zone Alarm

Step 3: Click On The FIREWALL Tab To The Left

Step 4: Click On The ZONES Tab (Which Is A Smaller Tab Near The Right)

Step 5: Click On Add

Step 6: Select IP Adress

Step 7: Set It To Trusted, Add The IP Adress From Cain And Abel, and Put The Description Of Your Choice And Hit Ok

Note: You Must Also Always Have Bungies IP Adress In Your Trusted (65.59.234.161)

Step 8: Click Apply

Step 9: Go To The MAIN Tab Which Should Be Right Next To The ZONES Tab

Step 9: Highlight Internet Zone Security (The Blue One) And Put It To High

Note: The Trusted Zone Security (The Yellow One) Can Be On Medium Or Off

If You Did These Steps Correctly When Your Friend Starts The Game He Should Get Host (Another Note: You Have To Be Poisoning In Cain And Abel In Order For This To Work)



Standbying For Host


Ok, Stanbying For Host Is A Bit Tricky But Easy If You Know The Exact Way To Do It. This Is Useful If You Don't Have Any Friends That Can Bridge You At The Moment, And Trust Me, It Gets Really Agrivating And Uncomfortable If Your Computer Isn't Right Next To Your Xbox, But That's Something Your Gonna Have To Deal With.

A Couple Reminders: This Does Not Work All The Time In Double Team So I Wouldn't Try It, And You Have To Make The Party That Your Going To Do This In

Step 1: Open Up Zonealarm

Step 2: Click On The FIREWALL Tab

Step 3: Highlight Internet Zone Security (The Blue One) And Put It To High

Note: Everyone In Your Party Has To Be In Your Trusted In Order For Them To Stay In The Party Without Lagging Out

Step 4: Start The Game

Note: You Should Get Host Boxes Everytime Since Your Firewall Is On High

Step 5: When You Get To Step 2, Turn Your Firewall Down To Medium

Step 6: Wait Until It Goes To Step 3 (Configuring Game)

Step 7: Count To One Mississippi And Then Click The Stop Button On The Top Of Zone Alarm

Note: You Should NOT Wait Until The Matched Players Have Dissappeared, There Should Be About 1.5 Seconds Left After You Click The Stop Button Until They Dissappear

Step 8: Once You Get To Step 4 Click The Stop Button Again To Disable The Standby

If You Did These Steps Correctly You Should Get Host When The Game Starts, And Just Another Tip, The Stop Button Is Also Another Way To Self Standby (Its The Same As A Cord But Less Work)


Team Standbying

Finally, The Team Standbying Part, This Is Probably The Easiest Thing Out Of All The Things In This Tutorial, So Sit Back, Relax, And Listen to The Other Team *****!

Step 1: Open Up Auto Standby and Zonealarm

Step 2: Put The Up And Down Time As Any Of These (2 Up 1 Down, 1.75 Up, 1.5 Down, Or 2 Up, 3 Down)

Step 4: Start A Game And Make Sure You Get Host

Step 5: When You Are At Step 4 Put Both Your Internet and Trusted On Medium

Step 6: Click Start On Auto Standby

Note: After You Do That If Something Pops Up That Says Auto Standby Has Suspicious Behavior Blah Blah Blah Hit Allow Before You Do Anything On Zonealarm

Step 7: Select High On The Internet Zone Security On Zonealarm

Your Firewall Should Start Moving From High To Medium (High Is Up Time And Medium Is Down Time) If It Is, You Did Everything Right

A Few Reminders: You Have To Be Poisoning In Cain And Abel When You Do This, And DO NOT Mess With Anything On Your Computer After You Start Team Standbying, Because If You Click Something Else Then It Will Auto Standby That And Not Your Firewall, So Don't Move Your Mouse Around


Well, That's All I Got For Now, Hope I Helped!

Join Now!

xX Mellowyellow is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On