ICS - Internet Connection Sharing!

[T Sizzles]

I am reposting this because the stupid Se7enSinsBot deleted it.

Here's the ultimate ICS bridging tutorial. It is guaranteed 100% to work.
1. Get all needed programs (ZoneAlarm, Comview) and a crossover cable
2. Plug in your xbox and pc and turn it on.
3. Go to network connections. You should have 2 connections. 1 Interenet and 1 Xbox. You should get this screen:



( My wireless card is the internet and the LAN connection is to my xbox.
4. Right-click your internet connection and you should get this screen:



Click the Advanced Tab on the top

4. You should get this screen:


5. Now, tick the two boxes for ICS.
OK. Now you have set up ICS. Go to zonealarm and add the ips and you should have 2 active networks:


Put Your 2 Networks in the Internet Zone and the XBL ips in the Trusted Zone.
Now, put your firewalls on low and turn on your xbox.
Go to network settings and set you IP adresses to automatic, and DNS servers to manual. If you are unsure of your DNS, contact your Internet Provider.(aka Comcast, Verizon, SBC)
FIND YOUR DNS SERVER!!!
1. Go to Start>Run>cmd



2. You should get this screen:




Enter ipconfig/all then hit enter


The 1st DNS Is ur Primary And the 2nd Is ur secondary

If sucessful, you should be able to sign on!
Always keep your firewalls on low when you sign on and off.
This tutorial © 2006 tsizzles and may not be reproduced without my consent.

[brosive tim]

pretty good tutorial

[brosive tim]

oh and just to help you out as well as others and preventing more work you do not have to do the dns part