Bridging with WinAPRspoofer

**l Krafty l** · 08-16-2006, 03:40 AM

Bridging with WinAPRspoofing
By Krafty

What do I need?
WinAPRspoofer
Any Zone Alarm Product(This tutorial is based off of Zone Alarm Pro)
Zone Alarm Keygen

Any advantages to this program?
No, this program is just a lower version of Switchsniffer, I would recommend using that.Click here for tutorial, but it wouldnt hurt to have a tutorial for this program also.

Anything else?
Nope, lets get started.

Step 1:
Open winAPRspoofer

Step 2:
Once you open the program, a small pop-up window should appear

Here, you will find a drop down box, click that and select your ethernet port that you use to connect to the router, you will also need to know the Default Gateway and IP address on this window

Step 3:
Click on the "Spoofing" tab

These should be the default settings, but if not when you click this, make sure you change it so its identical to the image above.

Step 4:
Once that is done, press ok

Now you will be take to the main window

Step 5:
Now, on the tab towards the top, you will see a button that says "Scan", press that button

Step 6:
Now, you will see the IP(s), the only ips that need to be checked is yoru XBOXS IP,YOUR DEFAULT GATEWAY IP,and your ROUTERS IP.

So any other IP(S) need to be unchecked

Step 7:
Now, back where the "Scan" button is, you should see the "Start" button next to it, press that button

Step 8:
Once you press that button, your connections are now "bridged", to stop it, simply click the "Stop" buttton which should show up when teh "Start" button is pressed

To make sure you connections are poisioning, down in your Windows taskbar, if you have you network status icon on, when your searching it should be looking like this:

And it should stay that way until you are either in a party doing nothing or if you clicked the "STOP" button. But if you follow what I just showed you then you should have to worry. I tested this in 2 games and it did work

Now, you can proceed to using Zone Alarm regularly:
Step 1:
Open Zone Alarm (A-Duh)

Step 2:
Just for safe keeping, turn your firewall off (make sure you dont have hackers out to get you at this time).

Step 2:
Go to your rules(Zones) tab. First thing we wanna do is set your current network from Trusted to Internet. To do that, right click on "Zone" and select "Edit":

Now, a small window should pop up. All you have to do is change it from "Trusted" to "Internet" and then press "OK"

Step 3:
Now it should be on "Internet", and your window should look similar to this:

Step 4:
Now, time to add IPs. First you need to add Bungies IP(65.59.234.161). Now, if you see the same exact IP but with a different ending (IE: 65.59.234.162), add it also to be extra safe. When it doesnt show up in Cain, then you can remove it.
To add IPs, go down to the bottom-right hand corner and click on "Add>>" and select "IP Address...":

Step 6:
Now a small window should pop up, here is where you input the IP.
Just for example, I'm gonna input a random IP. You would do this twice if your bridging. 1)Bungies IP, 2)Your friends IP which your forcing host to. Make sure you have the right IP(s) also.(Check Cain). You can make the description whatever you want:

Step 7:
Now, make sure the Zones in "Trusted" and then press "OK", your window should now look similar to this:

Step 8:
Now, make sure you save the changes by either clicking another and and selecting "OK" at this prompt:

Or, on the bottom-right and corner press "Apply," If you do this, it sill be saved and you wont see the prompt above:

Step 9:
Now click on the "Main" tab towards the top of the ZAP FW.

Step 10:
Now, put your Firewall(Internet Zone Security) tab on High and leave your Trusted on Low. Your friend should be bridged now, hve him talk after doing this to make sure he still has connection to you.

There you go, enjoy
-Krafty

MLG x 0v3rDoSe · 06-11-2007, 08:45 PM

When I click Start, My ZAP thing pops up, and says Suspicious Behavior, Windows
ARP Spoofer is trying to launch, and when I click apply, it exits out of WinARP...