unseen, but has holes, bridge self host tut

[Some Person 2]

I FOUND THIS TUT and it had holes, could someone help me a fill them in?
(not made by me)
Requirements:
- Zone Alarm Pro
- xbl (Buy Cheap XBL Codes)
- XBOX
- Bridged Connections

--------------------------------

1) Open ZAP and go to Firewall > Expert Tab

2) Click the add button. Now a pop up window will come up

3) Now under source, click:
Modify > Add Location > IP Address
Then type your IP and a desired description. Click OK.

Then, under destination click modify > add location > Internet Zone to add the internet zone.

4) Under destination click modify > add location > add ip address and type in this:

Now under destination again click Modify>Add Location>IP Address and type this in and click "ok":

5) Now under protocol click modify>add protocol>add protocol and type this in:

6) Under expert tab, click add rule again to add your second rule (make sure this rule has rank 2).

8) Now under source click modify>Add Location>IP Address and type this in and click "ok":

Now under source again click modify>Add Location>IP Address and type this in and click "ok":

9) Now under destination click modify>add location>IP Address this will pop up:

Then type your IP and a desired description and click "ok"
Then, under destination click modify>add location>Internet Zone.

10) Now under protocol click modify>add protocol>add protocol and now you willl see this:

Now add this info and click "ok":

Click OK

11) Ok, you just made Bungie bridge you host. Now you can keep your friends in your Zones and you can still bridge other people host but when you want to bridge yourself host, you just put your firewall on "Med" and you don't have to get host boxes.
ENJOY!

[l Krafty l]

This has been seen thousands of times. This has been tested and proven false thousands of times. So its no unseen, and it doesnt have holes, it just doesnt work.

Closed