Step 3: Once the installer is finished reboot the iPod and hold rewind to boot into Linux.
2.1 iPod Mini 1st Gen

Step 1: Run the installer
Step 2: Follow the steps the installer says
Step 3: Once the installer is finished reboot the iPod and hold rewind to boot into Linux.
2.2 iPod Mini 2nd Gen

Step 1: Run the installer
Step 2: Follow the steps the installer says
Step 3: Once the installer is finished reboot the iPod and hold rewind to boot into Linux.
2.3 iPod Nano 1st Gen

Part 1: Installing Linux
Step 1) Download Miche's Easy Installer
Code:
http://rapidshare.com/files/22489765/nanoipl.zip
Step 2) Plug In Your Ipod So It Goes Into Disk Mode, Run The Program And Click Next.
Step 3) It Should Now Take You To A Similar Screen That Says Now Installing.
Step 4) Next It Will Say Installation Complete.
Step 5) Now Linux Is Successfully Installed On Your Ipod Nano 1st Generation.
Part 2:Puting Working Movies On Your Ipod Nano.
A Quick Note About The Movies. An Ipod Nano
CAN NOT Read Regullar .avi Or Any Other Type Of Movie File It First Needs To Be Converted To Frames! A Movie Converter Is Provided By Joey C. So Credits To Him. ^_^
Step 1) Download MoPiD 1.5 Series Ipod Movie Converter.
Code:
http://rapidshare.com/files/22490121/mopid.zip
Step 2) Open It And Select "MoPiD.exe"
Step 3) Click Okay In Top Left Corner.
Step 4) Click Continue.
Step 5) Click Okay And Select The Movie That You Want To Convert.
Step 6) Click Okay And Select An Output Location For Your Movie.
REMEMBER TO ADD .avi AT THE END OF YOUR NEW FILE NAME OR IT WILL NOT WORK Step 7) Chose Nano At The Bottom Of The List.
Step 8) Chose the Frames Per Second (FPS) Of The Movie 15 Is Good 10 Should Be Your Minimum.
Step 9) Click Okay And Yes Then Your File Will Start To Convert. It Will Say Skipping Frame Rapidly In The Dos Window That Is Okay Because Your Movie Was Probably 30 FPS. This Is Just Making It Less FPS.
Step 10) YOUR MOVIE IS NOW CONVERTED. Now You Need To Copy Your New Movie File To Your Ipod. Open Up My Computer And Open The G:\ Drive Open The Notes Folder And Make A New Folder Inside It Called Movies. Then Copy Your Movie Inside That File.
If you want to install the game Doom read this tutorial
Code:
http://www.se7ensins.com/forums/ipod-modding/46344-put-doom-ipod.html
General Information on the nano
To Boot Into Linux Hold Down Rewind When Starting The Ipod. To Exit Linux In The Root Menu Select Power And Chose Quit Linux. To Play Movies You Need To Use File Browser In Linux Select the Notes Folder Then Select The Movies File That You Created And Watch Your Movie.
3.1 iTouch

For The installer to work You Must have firmware version 1.1.1 you can check in itunes.
Step 1) Check your firmware in itunes. if 1.1.1 skip to the bottom tutorial.
Step 2) if firmware is version 1.1.2 use this tutorial
Code:
http://www.se7ensins.com/forums/ipod/81305-downgrade-your-ipod-firmware.html
Step 3) if firmware is version 1.1.3 use this tutorial
Code:
http://www.se7ensins.com/forums/ipod-modding/82899-downgrade-1-1-3-1-1-1-a.html
This is a Windows Tutorial Not Mac.
Here are Step by Step instructions on how to Hack Via Jailbreaking The iTouch to Allow Third Party Programs. ex. Nes.
1. Do a system restore just to be sure everything is clean and non corrupt on your iTouch.
2. Open Safari on the iTouch
3. Browse to this Exact URL
Code:
http://jailbreak.toc2rta.com
4. Wait a few seconds and Safari should crash. (This is good)
5. On your windows pc download this file.
Code:
http://rapidshare.com/files/62141406/touchFree.zip
6. Extract it to one folder so its not a jumble mess on your desktop.
7. Connect your iTouch to your pc. Make sure iTunes is closed. also go to task manager and make sure ituneshelper.exe gets closed too
8. Run the touchfree executable.
9. It will do everything automated for you. When it says to reboot. Hold the sleep button and the Home key. (if it says reboot twice. then do it twice)
10. When it asks for IP. you must have the iTouch connected to the same network as you wirelessly. On iTouch go to settings>Wi-Fi>Click the blue arrow beside your network and type that ip adress into touchfree
11. Locate the Putty Executable. and open it.
12. Type in your iTouch's IP and hit okay.
Code:
Username: root
Password: alpine
13. Enter the user name and pass (pretty easy not hard to miss)
14. Type
/Applications/Installer.app/Installer and hit enter to launch Installer.
15. After AppTapp opens on your iTouch, press control+c to close it
16. Open Safari on iTouch and navigate to "http://conceitedsoftware.com/iphone/beta"
17. Tap yes to add it to Installer
18. Back in terminal, using putty, type
/Applications/Installer.app/Installer and hit enter to launch Installer again.
19. Install
Trip1PogoStick located under System category to enable scrolling and applications.
20. When you're done, reboot the iTouch and close all your windows. You now have AppTapp installed on your iTouch =]
for more info on iTouch modding look at my other Ultimate tutorial
Code:
http://www.se7ensins.com/forums/ipod-modding/80381-ultimate-itouch-modding-guide.html
For trouble shooting iPod Hacking read this thread
Code:
http://www.se7ensins.com/forums/ipod-modding/47273-unknowing-s-ipod-troubleshooting-steps.html
Entire tutorial written by me. Tools used assembled from other sites. iTouch and iPod nano tutorials written by me also. i believe this covers all the iPods? any iPod that is hackable is in this tutorial.
Thankz to Gillilandboy for diet moding the ipod section
Lulz now this is a detailed tutorial