Different Hotswap

[Mayhem51]

Required materials:
* One xbox (in which you wish to access the hdd of)
* One xbox (modded)

Procedure:
1. Power up the unmodded xbox and wait till it is unlocked
(This can be achieved 2 ways:
1. Let the xbox sit for a few mins until the drive spins down
2. Insert and game and let it load)
2-3. (Steps 2 and 3 must be performed at the same time; or darn close)
a. disconnect the the ide cable from the unmodded xbox and
b. power up the modded xbox (without the hdd hooked up)
4. Once the 'flubber' animation finishes and the 'big x' comes up you will hear it access the dvd drive once it finds the dvd drive it will begin to search for a hdd. At this point plug in the ide from the modded xbox into the (now unlocked) hdd of the unmodded xbox.
5. At this point the modded xbox will be accessing the unmodded xbox's hdd.
Note: When connecting the unmodded xbox's hdd to the modded xbox's ide you must do it after the dvd drive detection or your hdd will be relocked. Timing is crucial.

Taking from Xbox-Scene

[EvRocK]

A kinda complex way to hotswap.

[Mayhem51]

not really its actually alot easier i think

[sickofit]

i find this pointless. just do the tutorial digtal high wrote

[Matamoska]

Do U now If This Will Work If U Booted a AID Disk On the Modded Xbox And then Take the IDE Cable from the modded xbox put it in a Xbox with err0r 16 so u can FTP to it and fix it

[Sean_J]

Just too make sure because ime not completly sure ot swapping is making a copy of the hord drive and putting it into another hdd righrt?

[dragonz2444]

No, hotswapping is quickly changing out a disc with a modded one so that you disc doesn't know you changed it. Thus comes online halo 2 modding

If im wrong im sorry i dont get this tut, but i dont think i am