How to Disassemble Your Xbox 360

[Se7eN MasTa]

Step by Step instructions with pictures. 1. Remove Xbox 360 Faceplate as shown below

2. Remove the bottom left rubber from case.

3. Follow the instruction to insert the XCM opening tool to the square hole (insert it close to the edge of the hole then turn right as pictured in figure A, and turn left as it shows in figure C)

4. Push the XCM opening tool into the base grill to take off the right heat panel.

5. Push the XCM opening tool to the base grill to take off the left heat panel.

6. Take the heat panels apart.

7. Remove Microsoft Sticker/Seal

8. Undo the 4 Buckles on the Front of the console.

9. Push the XCM opening tool into the indicated holes, press hard to let the top and bottom panels pop apart.

10. Pull apart the 2 halves of the Xbox 360 case.

11. Remove the DVD Drive eject button. (Pull out)

12. As indicated by the arrow, remove the 6 screws by using the Allen key tool provided.

13. Remove the DVD drive bezel..

14. You are Done!! (All parts shown below)




Thanks to:



Textbook from 360mods for the links.
Xbox-Accessories for hosting the tutorial.

[BooperGrandson]

You still didn't completely strip the motherboard and everything inside of it. You only removed the shell.

[XboxPlayer]

Quote: Originally Posted by BooperGrandson

You still didn't completely strip the motherboard and everything inside of it. You only removed the shell.

You really think so ?
This is nice dude thanks, wish i would have read this before i attempted to open mine first.

[BAGHDADBOB]

you dont need the tool i did mine with a toothpick

[Beezy 4 sheezy]

Yeah but the tool makes it easier. I broke off a piece of my case with a toothpick but never had a problem with the tool.