Ok well lets see.. things needed:
1. Usb to ethernet adapter (with driver cd) (Radioshack Catalog #: 25-3283)
2. Crossover cable (Radioshack Catalog #: 278-2011)
3. Router
4. Zap
5.Commview
My setup is like this
1. Ok well first thing u want to do is plug in your usb adapter and install the drivers (on the cd)
2. Next what u want to do is put the crossover cable plug it in your xbox, then into the USB adapter.
3. Now what you do is turn your xbox on. 3 green lights on the adapter should light up.
4. Ok now you go to Start > Control Panel > Network and Internet Connections > Network Connections.
5. Then you want to click LAN and hold down CTRL and click on LAN2 (might be LAN3 depending on the situation)
6. Now right click and click "Bridge Connections".
7. Ok now wait, and it should show the little bridge thing (on LAN ad LAN2) and it will say connected.
8. Now whether or not it says LAN2 is connected, it is, so don’t worry.
9. Get zap and Commview which are here..
http://rapidshare.com/files/440113/_savefi...gTools.rar.html (credits go to Dem Pyros for these)
10. Install these and bridge how you would normally bridge as if you had any other setup.
Have fun!!!
Originated from
(OFFLINE) Board Offline
__________________
American cars suck? yet the Chevy Malibu, Cadillac CTS, Saturn Aura, and Opel/Vauxhall Insignia earned car of the year awards & Other models being seen as soem of the best in their class. (G8, Enclave, Vette)
