[GRINSPANKER13]

Finally I Figured Out How To Do It So Here It Is For All You



Things You Need:
1. CoD:WaW ISO
2. Hex Workshop
3. wx360
4. ABGX
5. Simplyzip


Credit To racekilladude For First Finding It
Credit To Me, Toxic, And biggyd22 For Getting Everything Working
Credit To Me For The Making Of The Tutorial


Tutorial

1. After Downloading The ISO, Open It With ABGX
2. Go To The AutoFix Tab, Change The AutoFix To Level 3, Hit Launch


Once It's Done Hit Any Key To Exit, Close ABGX

3. Open Wx360, Open You CoD:WaW ISO
4. Extract The File Called CODE_POST_GFX.FF "Make A Backup", Also Extract The File Called default.xex



5. Open CODE_POST_GFX.FF With Hex Workshop, Delete The First 12 Bytes

Before


After


Hit Save, No For Backup

6. Open SimplyZip, Click The External Progs Tab, Hit ZLIB (Pack/Unpack)

7. Hit Browse, Find CODE_POST_GFX.FF, Hit Open, Choose Decompress, Hit Start



You'll Now Have A File Named CODE_POST_GFX Where CODE_POST_GFX.FF Is

8. Open CODE_POST_GFX With Hex Workshop, Find buttons_default.cfg



Found


9. Use The Down Arrow Until You See bind DPAD_UP



Once You Find That Change The First DPAD Binds
"+actionslot 1" "+actionslot 2" "+actionslot 3"
to
"god"--------- (- = 10 spaces) "noclip"------- (- = 7 spaces) "give all"----- (- = 5 spaces)



10. Go Back Up To buttons_default.cfg, You'll See Unbinds, Dvars Will Go After The First Unbind



11. Lets Add (player_sustainAmmo "1")
It Has To Have Two Periods Infront Of It With The Values 0D 0A And set After The Periods
..set player_sustainAmmo "1"



Then Lets Add Another (player_sprintSpeedScale "4.0")
After ..set player_sustainAmmo "1" You Need To Add The Two Persiods And The Set
..set player_sustainAmmo "1"..set player_sprintSpeedScale "4.0"- (- = 1 space)



And So On!
If You Run Into Have Say ..set player_sprintSpeedScale "4.0"_RSTICK..
Just Cover _RSTICK With Spaces

After Putting All Dvars And Binds Hit Save

12. Open SimplyZip, Click The External Progs Tab, Hit ZLIB (Pack/Unpack)

13. Hit Browse, Find CODE_POST_GFX, Hit Open, Choose compress, Hit Start



You Should Now Have A File Named code_post_gfx.zlp Where CODE_POST_GFX Is
Delete The File code_post_gfx.ff

14. Rename code_post_gfx.zlp To code_post_gfx.ff

15. Open The Renamed code_post_gfx.ff With Hex Workshop
Also Open The Back Up code_post_gfx.ff You Made With Hex Workshop

Copy The The First 12 Bytes From The Backup and Paste Them At The Beginning For The Renamed File

Back Up


Renamed File (Before)


Renamed File (After)


Hit Save, No For Backup

16. Open wx360, Open You CoD:WaW.ISO
Locate CODE_POST_GFX.FF, Right Click And Hit Replace
Find Your Renamed File, Hit Open

17. Locate default.xex, Right Click And Hit Relpace
Find Your default.xex You Extracted At The Beginning, Hit Open



Close Wx360

18. Open It With ABGX
Go To The AutoFix Tab, Change The AutoFix To Level 3, Hit Launch


19. Burn With Imgburn

20. Clear Your Cache Then Reupdate

Download My File HERE



***MAJOR UPDATE***
People Who Are Getting The Black Screen Read This

It Happens Because You Download A Bad Rip
I Am 100% Sure
I Wasted 4 Disks Each With The Same ISO And Black Screen Outcome
I Download A New ISO And Everything Works Perfect

This post has been edited by GRINSPANKER13: 12 October 2009 - 03:28 PM

[a deeper b1ue]

Thank you for clearing it up. *cough* sticky *cough*

The first picture didn't load for me, but I asume it looks something like this?

This post has been edited by a deeper b1ue: 11 October 2009 - 04:40 PM

[knockout]

thanks seth and i agree sticky :)

edit: we can use action slot 4 also right? cuz if we use actionslot 3 which is dpad left we lose noobtubes -.-

This post has been edited by knockout: 11 October 2009 - 04:55 PM

[GRINSPANKER13]

Changed The Host, Can You See It Now?

[ZyGoMaTiC]

GRINSPANKER13 said:

Changed The Host, Can You See It Now?

I see it.

[GRINSPANKER13]

Alright!

[a deeper b1ue]

Yep, thanks

[knockout]

yo seth on this part

..set player_sustainAmmo "1"..set player_sprintSpeedScale "4.0"- (- = 1 space)

why is there suppose to be a space at the end of it? or is the space suppose to just be at the end of the last set cmd u put in?

[GRINSPANKER13]

i put a space so it would cover the G in LTRIG if you add more dvars you dont need a space until the last dvar

This post has been edited by GRINSPANKER13: 11 October 2009 - 05:16 PM

[a deeper b1ue]

so add a space after the last dvar?

[GRINSPANKER13]

No Say You Put Your Last Dvar And After The " You Still Have Some Letters From The Unbinds You Need To Cover Them With Spaces Until The Next ..
Mine Was
"1"..set player_sprintSpeedScale "4.0"G
So I Covered It With A Space
"1"..set player_sprintSpeedScale "4.0" ..

This post has been edited by GRINSPANKER13: 11 October 2009 - 05:19 PM

[a deeper b1ue]

Got it, thanks.

And once agian, great tutorial!

[xpellegrinx]

wait so u dont need a flashed xbox???

[a deeper b1ue]

For the last time: YOU CAN HOT SWAP

[GRINSPANKER13]

Nope Not If You Know How To Hotswap

[ZyGoMaTiC]

[ame=http://www.youtube.com/watch?v=8zADOetn_KQ]YouTube - Hoswapping on Xbox 360[/ame]

[Killomatic]

GRINSPANKER13 said:

Nope Not If You Know How To Hotswap

Can someone explain how exactly u hot swap this, i'm still a little confused

Edit... didn't see video, i had this page loaded from like 5 hours ago

This post has been edited by Killomatic: 11 October 2009 - 05:45 PM

[ttrever]

Nice Seth thank you for giving us a little credit for finding this out but you cleared everything for people.

[GRINSPANKER13]

No Problem!
This Is What Mine Has
buttons_default.cfg.unbind BUTTON_RSHLDR..set player_meleeRange "999"..set player_sprintUnlimited "1"..set ReviveTriggerRadius "99999"..set player_sustainAmmo "1"..set player_clipsizeMultiplier "999"..set ai_meleeRange "0"..set player_sprintSpeedScale "2.0..set cg_laserForceon "1"..

Then

..bind DPAD_UP.."god" ..bind DPAD_DOWN.."give all" ..bind DPAD_LEFT.."noclip" ..bind DPAD_RIGHT.."notarget" ..

[vvSTRIDEvv]

Thanks Seth, looks really good!!