[OZ0NE]

First time flashing a drive. I installed A VIA 6421 card, installed the PortIO32, disabled the drivers for the 6421(deleted etc). I have the xbox powered via xbox cable, the drive is connected to the PCI card with the sata. The drive makes noise when it turns on like normal, so its not the drive not getting power. I'm pretty sure I have the Sata cable plugged into the correct slot. I open up jungle flasher and it says no drive detected. Any ideas?

Oh and I have a DG-16D2S. FW 83850C

Also, unplugging the cable from the PCI card turns off the computer and blue screen of deaths it... so I dont think its my connection...

This post has been edited by OZ0NE: 17 November 2009 - 07:17 PM

[vato]

this is why people get connectivity kits...the only thing I could suggest is unplugging everything and making sure your sata cable is in the right way and make sure its on the back of the sata card and not the front slot

[OZ0NE]

Theres only one place the sata cable will fit...

Still need help please

This post has been edited by OZ0NE: 17 November 2009 - 09:55 PM

[Probe 7]

whats your operating system what version 32bit or 64bit
I recommend not flashing ur drive with jungleflasher unless ur using it to make the firmware
try some of dosflash tuts

[OZ0NE]

Probe 7 said:

whats your operating system what version 32bit or 64bit
I recommend not flashing ur drive with jungleflasher unless ur using it to make the firmware
try some of dosflash tuts

I'm using Xp. Also, when ever I try to find a tut for dos flashing, 9 times out of 10 they are for the lite that requires the probe.

Edit: NVM I played with the drivers and somehow got it.

This post has been edited by OZ0NE: 17 November 2009 - 11:50 PM